跳至主要內容
登出

歡迎來到 Dell

我的帳戶
  • 簡單快速地下訂單
  • 檢視訂單及追蹤商品運送狀態
  • 建立並存取您的產品清單
登入 建立帳戶 Premier 登入 合作夥伴計畫登入
與我們連絡

您的 Dell.com 購物車

Re-imaging Windows 10 IoT on a Latitude 3440, Latitude 5440, and OptiPlex 7410 AIO

摘要: Windows 10 IoT may be reinstalled using a USB drive that is supplied by Dell support.

本文章適用於 本文章不適用於 本文無關於任何特定產品。 本文未識別所有產品版本。
查看其他資源

說明

Affected Platforms:

  • Latitude 3440
  • Latitude 5440
  • OptiPlex 7410 All-in-One

Affected Operating Systems:

  • Windows 10 IoT Enterprise LTSC 2021
Note: For system board replacement service scenario, the Win 10 IoT operating system Recovery USB drive is dispatched with the replacement system board.
  1. Insert the Windows 10 IoT operating system Recovery USB drive into a USB port of the device.
  2. Power on the device, press F2 to enter BIOS setup.
Note: The BIOS admin password is Fireport
  1. Go to Integrated Devices and Enable USB boot support.

Enable USB boot Support
Figure 1: (English Only) Enable USB boot Support

  1. Go to Storage, SATA/NVMe Operations and select ACHI/NVMe.

Select ACHI/NVMe
Figure 2: (English Only) Select ACHI/NVMe

  1. Go to Virtualization Support, set Enable Pre-Boot DMA Support to Off, set Enable OS Kernel DMA Support to OFF.

Set Enable Pre-Boot DMA Support to Off, set Enable OS Kernel DMA Support to OFF
Figure 3: (English Only) Set Enable Pre-Boot DMA Support to Off, set Enable OS Kernel DMA Support to OFF

  1. Save the settings and Exit.
  2. When the device reboots, press F12 to trigger the Boot Menu and select the bootable Windows 10 IoT operating system Recovery USB drive and Press Enter.

Select the bootable Windows 10 IoT OS Recovery USB key and Press Enter
Figure 4: (English Only) Select the bootable Windows 10 IoT operating system Recovery USB drive and Press Enter

  1. Select the operating system image and click OK. This starts the installation process.

Select the operating system image and click OK
Figure 5: (English Only) Select the operating system image and click OK

  1. After the installation is complete, the device will reboot. Remove the operating system Recovery USB drive.
  2. Press F12 to trigger the Boot Menu and select the SSD/HDD storage where Windows 10 IoT operating system is installed and Press Enter.
  3. Windows IoT boots to the desktop.

Windows 10 IoT Desktop
Figure 6: (English Only) Windows 10 IoT Desktop

受影響的產品

Latitude 3440, Latitude 5440, OptiPlex All-In-One 7410
文章屬性
文章編號: 000214612
文章類型: How To
上次修改時間: 07 6月 2024
版本:  8
向其他 Dell 使用者尋求您問題的答案
支援服務
檢查您的裝置是否在支援服務的涵蓋範圍內。