Lights not responding on Alienware and G Series computers after installing the Alienware Command Center
摘要: If the lights on your Alienware system turn off or stop responding to the changes you make you can attempt to run a repair installation using the latest version of the Alienware Command Center. To download the latest version of the Alienware Command Center visit Dell's support site. ...
症狀
 |
Description | When you install the Alienware Command Center, the ELC Firmware can get corrupted causing the lights on the system to stay off or not responsive to changes done in the Alienware Command Center. The ELC Firmware may get corrupted for several reasons, including a sudden shutdown, disconnecting or reconnecting the AC Adapter during installation. |
|
Supported Systems:
| Alienware and Dell G-Series Systems Supporting Alienware Command Center 5.0 and higher | |||||||
Solution
Run a repair installation of Alienware Command Center following the steps below:
-
Download the latest version of Alienware Command Center from the Dell Drivers Page
-
Run the setup without uninstalling the previous version of the Alienware Command Center
-
Once the installation starts you will receive a prompt with options to Modify, Repair or Remove
-
Click on Repair to force the installation to flash the firmware again.
-
Restart the system and confirm if the issues persist
原因
|
|
 |
 |
 |
 |
解析度
Out of warranty? No problem click here, enter your Service Tag and view our offers.
Currently, offers are only available for US, Canada, UK, and France PC Customers. Server and Storage not applicable.
受影響的產品
G Series, Alienware文章屬性
文章編號: 000178139
文章類型: Solution
上次修改時間: 10 4月 2021
版本: 5
向其他 Dell 使用者尋求您問題的答案
支援服務
檢查您的裝置是否在支援服務的涵蓋範圍內。
文章屬性
文章編號: 000178139
文章類型: Solution
上次修改時間: 10 4月 2021
版本: 5
向其他 Dell 使用者尋求您問題的答案
支援服務
檢查您的裝置是否在支援服務的涵蓋範圍內。