跳至主要內容
  • 簡單快速地下訂單
  • 檢視訂單及追蹤商品運送狀態
  • 建立並存取您的產品清單

How to Install the Storage Controller (F6) Driver During the Windows Installation Setup Process

摘要: This article provides an overview of the installation process for storage controller drivers for different RAID controllers.

本文章適用於 本文章不適用於 本文無關於任何特定產品。 本文未識別所有產品版本。

症狀

No symptom information is available.

原因

No cause information is available.

解析度

Table of Contents:

  1. Driver Installation for RAID Controllers During an Operating System Reload
  2. Installation of RAID Driver with Intel Controller
  3. Installation of RAID Driver with LSI Controller
  4. Installation of RAID Driver with PERC Array

Driver Installation for RAID Controllers During an Operating System Reload

During a reinstallation of Windows with an active RAID array, the operating system may prompt for a storage controller driver. The driver must be installed before the software may be loaded. If the operating system Image does not include the correct RAID controller driver, Windows cannot see the hard drives to begin installation.

The correct RAID controller driver type must be determined. The Dell computer hardware configuration indicates this. Appropriate drivers can be downloaded from the Dell Support site.

Example of the operating system prompt to install the missing storage controller driver (Figure 1).
Windows Driver Set Up
Figure 1

 


Installation of RAID Driver with Intel Controller

  1. Check the BIOS of the computer and ensure that the RAID On option is selected.
  2. Set up the wanted RAID array in the RAID BIOS.
  3. Download the correct Pre-OS driver from our support site and have it extracted.
    1. The driver to download is different for the two versions of IRST. Be sure to get the correct driver, often designated the F6 driver.
    2. If loading Windows from a Dell DVD, the IRST driver is part of the load and does not have to use this process. The IRSTe driver is not however (Figure 2).
      Dell.com Driver
      Figure 2
       
  4. Load the extracted files onto a USB drive.
    1. This has to be completed on an alternate computer.
      Example of Extracted Files on USB drive (Figure 3):
      Windows Extracted Files
      Figure 3
       
  5. Once the files are extracted, proceed with the installation of Windows as normal.
    1. The USB drive with drivers must be plugged into the computer in order to install the drivers.
    2. On the left side of the screen, select the option to Load Driver(Figure 4).
      Windows Driver Set Up
      Figure 4
       
    3. Windows should detect the correct driver. Select Next.
    4. There are instances where the folder which holds the driver must be opened. Browse to the correct folder (Figure 5).
      Windows Driver Set Up, Driver Select
      Figure 5
       
    5. If no driver is listed clear and recheck Hide Drivers box.
  6. Drives for the installation should be listed once the driver has been installed (Figure 6).
    Windows Driver Set Up, Where to Install Windows
    Figure 6

Installation of RAID Driver with LSI Controller

  1. Set up the wanted RAID array in the RAID BIOS.
  2. Download the correct Pre-OS driver from our support site and have it extracted.

    Dell.com Pre OS Driver

  3. Load the extracted files onto a USB drive.
    1. This has to be completed on an alternate computer.
      Example of Extracted Files on USB drive:

      Extracted Files In Windows

  4. Once the files are extracted, proceed with the installation of Windows as normal.
    1. The USB drive with drivers must be plugged into the computer in order to install the drivers.

      Install Windows

  5. On the left side of the screen, select the option to Load Driver.

    Install Windows Load Driver

  6. Windows should detect the correct driver. Select Next.
    1. There are instances where the folder which holds the driver must be opened. Browse to the correct folder.

      Install Windows Select File

    2. If no driver is listed clear and recheck Hide Drivers box.
  7. Drives for the installation should be listed once the driver has been installed.

    Widnows Install Select Partition

 


Installation of RAID Driver with PERC Array

  1. Set up the wanted RAID array in the RAID BIOS.
  2. Download the correct Pre-OS driver from our support site and have it extracted.

    Dell.com Pre OS Driver  

  3. Load the extracted files onto a USB drive.
    1. This has to be completed on an alternate computer.
      Example of Extracted Files on USB drive:

      Extracted Files In Windows

  4. Once the files are extracted, proceed with the installation of Windows as normal.

    Install Windows

  5. On the left side of the screen, select the option to Load Driver.

    Install Windows Load Driver

  6. Windows should detect the correct driver. Select Next.
    1. There are instances where the folder which holds the driver must be opened. Browse to the correct folder.

      Install Windows Select File

    2. If no driver is listed clear and recheck Hide drivers box.
  7. Drives for the installation should be listed once the driver has been installed.

Back to Top

受影響的產品

Fixed Workstations
文章屬性
文章編號: 000148150
文章類型: Solution
上次修改時間: 23 5月 2024
版本:  9
向其他 Dell 使用者尋求您問題的答案
支援服務
檢查您的裝置是否在支援服務的涵蓋範圍內。