跳至主要內容
  • 簡單快速地下訂單
  • 檢視訂單及追蹤商品運送狀態
  • 建立並存取您的產品清單
部分文章編號可能已變更。如果這不是您要找的文章,請嘗試搜尋所有文章。搜尋文章

How Bootable Devices Work in UEFI Boot Mode

摘要: This article provides information about how bootable devices work in Unified Extensible Firmware Interface (UEFI) mode.

本文章適用於   本文章不適用於 

症狀

How bootable devices work in UEFI mode:

In order for BIOS to show a UEFI boot option for a fixed disk, there are only two possibilities:

  • The fixed disk has this file EFI\boot\bootX64.efi stored in the root folder
  • The OS installer has created a boot option on the disk.
Note: This boot option is only built during UEFI OS installation. The OS installer code finds the drive (blockIo device) to install the OS and create a boot option.

If the PERC hard drive image was originally installed in legacy BIOS mode, none of the above are true. There is no boot option for BIOS to list in the UEFI boot menu.


Removable media is treated differently:

BIOS always builds a boot option for removable media regardless of media presence. The virtual media (virtual Floppy and Virtual CD) should show up in the UEFI boot menu as removable device boot options. If they do not show up, then they were disabled.


原因

Not required

解析度

See above.

受影響的產品

Servers