跳至主要內容
  • 簡單快速地下訂單
  • 檢視訂單及追蹤商品運送狀態
  • 建立並存取您的產品清單

Installing Windows 10 or Windows 7 on a Dell computer with a RAID controller card

摘要: Steps for installing Windows 10 or Windows 7 on Dell computer with a RAID controller card.

本文章適用於 本文章不適用於 本文無關於任何特定產品。 本文未識別所有產品版本。

症狀

Follow the steps below to install either Windows 10 or Windows 7 using a Pre-OS Package on a Dell system using a separate RAID controller card (LSI, PERC, or Intel/F6).


 

Table of Contents:

  1. Installing Windows 10 on a Dell computer with RAID controller card
  2. Installing Windows 7 on a Dell computer with RAID controller card
 

Installing Windows 10 on a Dell computer with RAID controller card

To install Windows 10 onto a Dell system with a RAID controller card, the following are needed to get started:

  • Actual Windows 10 Install Media (Recovery Media will not work for this process)
  • Pre-OS Driver

Get Windows 10 Install Media:

  1. Download the Microsoft Media Creation Tool (Figure 1) from the following link: Microsoft - Create Windows 10 installation mediaSLN316821_en_US__1iC_External_Link_BD_v1

    SLN316821_en_US__2Media creation tool download
    Figure 1: Click Download Tool Now to download the Microsoft Media Creation Tool

  2. Run the tool (if saving, do not save it to the USB you will be formatting)
  3. Click Accept
  4. Select the option Create installation media (USB flash drive, DVD, or ISO file) for another PC
  5. Ensure that Language, Edition, & Architecture match with what was sold on the system
  6. Select USB Flash Drive
  7. Select the drive
  8. The media should then download & start burning automatically
  9. Ensure the Finish button is clicked at the end
  10. Safely eject the USB

Get Pre-OS RAID Controller driver:

  1. Go to Dell Support / Drivers & downloads for your Dell computer
  2. Set the Category dropdown box to sort by Storage (sometimes the driver will be in Storage Controller, as well)
  3. Download the driver that ties in with the controller in Service Tag Lookup
    • Intel controllers will use the Intel Rapid Storage Technology enterprise F6 Driver (Figure 2):
      SLN316821_en_US__3icon NOTE: F6 may not always be in the description

      SLN316821_en_US__4Intel controller driver download
      Figure 2: Download the Intel Rapid Storage Technology driver

    • LSI controllers will use LSI <Controller’s #> drivers for Windows 10 (Figure 3):
      SLN316821_en_US__3icon NOTE: There are several different LSI controllers. Ensure the Model Number matches with the one in Service Tag Lookup.

      SLN316821_en_US__6LSI controller driver download
      Figure 3: Download the LSI Storage controller driver for your system

  4. Download the driver, choose to Run the driver, select the Extract option, and extract it to a blank USB
    SLN316821_en_US__3icon NOTE: This CANNOT be the same USB where the Windows media was installed in the previous section

For additional reference on loading the Pre-OS Driver, refer to the following Dell Knowledgebase Article: How to Install the Storage Controller (F6) Driver During the Windows Installation Setup Process.

How to perform a clean installation of Windows 10:

Once you have the Windows media and controller driver downloaded to the separate USB drives, follow the steps below to install Windows 10:

  1. Insert the Windows 10 Boot USB
  2. Power up the system while tapping F12 on the keyboard
  3. Select the USB UEFI option
  4. Make sure Language, Time/Currency, & Keyboard Input are all correct for your region
  5. Click Install Now
  6. Select I don’t have a product key (this will be loaded in later)
  7. Select Custom: Install Windows only (advanced)
  8. Insert the Pre-OS Controller Driver USB made from the steps in the previous section
  9. Select Load Driver and select the driver once prompted
  10. Select the partitions one at a time and select the Delete option
    SLN316821_en_US__3icon NOTE: If there are multiples drives in the system, please ensure that only the OS drive is cleared (typically Drive 0)
  11. Once the Drive shows only Unallocated Space, select Next and let the installation begin
Back to Top

Installing Windows 7 on a Dell computer with RAID controller card

To install Windows 7 onto a Dell system with a RAID controller card, the following are needed to get started:

  • Windows 7 Install Media (DUSB/DirectUSB media will not work for this)
  • Pre-OS driver

Use the Dell OS Recovery Tool to create the USB recovery media:

  1. Download the tool from the following link: Dell - Download OS Recovery Tool (Figure 4:

    SLN316821_en_US__9Download OS Recovery Tool
    Figure 4: Click on Download OS Recovery Tool

  2. Run the tool (if saving, do not save it to the USB you will be formatting) and install the tool
  3. Launch the Dell OS Recovery Tool
  4. Hit Get Started and then Next
  5. Click on Other Computer, enter the computer Service Tag, and hit Next
  6. Choose to download the Windows 7 Image (Figure 5):

    SLN316821_en_US__10Select Windows 7 OS
    Figure 5: Select the Windows 7 Operating System to download

  7. Once the download completes, hit Next
  8. Select the USB to burn the operating system to and hit Burn OS (Figure 6):

    SLN316821_en_US__11Burn Windows 7 USB
    Figure 6: Select USB Drive and click Burn OS

  9. Once the process finishes, exit the tool and eject the USB

Reference the following Dell Knowledge Base article for additional reference on the above steps: How to Download and Use the Dell OS Recovery Image in Microsoft Windows.

Get Pre-OS RAID Controller driver:

  1. Go to Dell Support / Drivers & downloads for your Dell computer
  2. Set the Category dropdown box to sort by Storage (sometimes the driver will be in Storage Controller, as well)
  3. Download the driver that ties in with the controller in Service Tag Lookup
    • Intel controllers will use the Intel Rapid Storage Technology enterprise F6 Driver (Figure 7):
      SLN316821_en_US__3icon NOTE: F6 may not always be in the description

      SLN316821_en_US__4Intel controller driver download
      Figure 7: Download the Intel Rapid Storage Technology driver

    • LSI controllers will use LSI <Controller’s #> drivers for Windows 10 (Figure 8):
      SLN316821_en_US__3icon NOTE: There are several different LSI controllers. Ensure the Model Number matches with the one in Service Tag Lookup.

      SLN316821_en_US__6LSI controller driver download
      Figure 8: Download the LSI Storage controller driver for your system

  4. Download the driver, run it, select the Extract option, and extract it to a blank USB
    SLN316821_en_US__3icon NOTE: This CANNOT be the same USB where the Windows media was installed in the previous section

For additional reference on loading the Pre-OS Driver, refer to the following Dell Knowledgebase Article: How to Install the Storage Controller (F6) Driver During the Windows Installation Setup Process.

How to perform a clean installation of Windows 7:

  1. insert the USB recovery media made using the Dell OS Recovery Tool
  2. Power up the system while tapping F12
  3. Select the USB Legacy option (if the computer has a PCIe/NVMe SSD hard drive, then this will be UEFI instead)
  4. Make sure Language, Time/Currency, & Keyboard Input settings are all correct for your region
  5. Click Install Now
  6. Select Custom: Install Windows only (advanced)
  7. Insert the Pre-OS Controller Driver USB made from the steps in the previous section
  8. Select Load Driver and select the driver once prompted
  9. Select the partitions one at a time and select the Delete option
    SLN316821_en_US__3icon NOTE: If there are multiples drives in the system, please ensure that only the OS drive is cleared (typically Drive 0)
  10. Once the Drive shows only Unallocated Space, select Next and let the installation begin

Reference the following Dell Knowledge Base article for additional reference on the above steps: How to Download and Use the Dell OS Recovery Image in Microsoft Windows.

Back to Top

原因

NA

解析度

Refer to Symptoms section.
文章屬性
文章編號: 000133510
文章類型: Solution
上次修改時間: 16 2月 2024
版本:  5
向其他 Dell 使用者尋求您問題的答案
支援服務
檢查您的裝置是否在支援服務的涵蓋範圍內。