跳至主要內容
  • 簡單快速地下訂單
  • 檢視訂單及追蹤商品運送狀態
  • 建立並存取您的產品清單

Running Dell Command and Configure commands in Microsoft Deployment Toolkit or System Center Configuration Manager

摘要: How to run Running Dell Command and Configure commands in Microsoft Deployment Toolkit (MDT) or System Center Configuration Manager (SCCM) Task Sequences.

本文章適用於 本文章不適用於 本文無關於任何特定產品。 本文未識別所有產品版本。

症狀

Refer to Resolution section.

原因

NA

解析度


This article provides the information on "Running Dell Command and Configure (formerly Client Configuration Tool Kit (CCTK)) commands in Microsoft Deployment Toolkit (MDT) or System Center Configuration Manager (SCCM) Task Sequences".


Dell Command and Configure

Dell Dell Command and Configure Application and is supported on OptiPlex, Precision and Latitude models running the following Windows operating systems: Windows 7, Windows 8/8.1 and Windows 10.

Dell Command and Configure (Version 3.2.0029, A01 or later) is available to download from the Dell Support website Drivers and Downloads section, Systems Management section for your Latitude, OptiPlex or Precision model system.

SLN299182_en_US__1icon NOTE: Links are provided to the download location of a download because individual files may be updated but the location of these files does not change, allowing you the ability to easily locate the most current version of an application or driver on the support site.

Running Dell Command and Configure commands in MDT / SCCM Task Sequences

Due to Dell Command and Configure  only outputting text after the tool has run, it must be run as a cmd.exe /c command in MDT/SCCM task sequences.

SLN299182_en_US__1icon NOTE: Even if cctk.exe is at the root of the Windows PE disk, cmd.exe must be run from the path:  x:\windows\system32   Cctk.exe may be located at the following path: x:\command_configure\x86_64 You must adjust your task sequences accordingly.

EXAMPLES:

cmd.exe /c x:\cctk.exe --setuppwd=dell

SLN299182_en_US__3MDT-SCCM1

cmd.exe /c x:\cctk.exe --fastboot=automatic --legacyorom=enable --embsataraid=ahci
--smarterrors=enable --tpm=on --tpmactivation=activate --tpmppipo=enable
--unmanagednic=enablewithpxe --usbpowershare=enable --wakeonlan=enable
--wirelesswitchchanges=deny –valsetuppwd=dell

SLN299182_en_US__4MDT-SCCM2


文章屬性
文章編號: 000177000
文章類型: Solution
上次修改時間: 16 2月 2024
版本:  5
向其他 Dell 使用者尋求您問題的答案
支援服務
檢查您的裝置是否在支援服務的涵蓋範圍內。