文章編號: 000129720
OptiPlex 3050 Support for PCIe M.2 SSD Hard Drives
摘要: This article provides information about the OptiPlex 3050 support for M.2 SSD PCIe hard drives.
文章內容
症狀
The M.2 slot on the OptiPlex 3050 supports only PCIe M.2 SSD hard drives. This article provides additional information about this issue to ensure that the correct M.2 SSD hard drive is installed.
原因
No cause information
解析度
The drive must use the PCIe bus instead of SATA when installing an M.2 SSD hard drive in the OptiPlex 3050. The following image (Figure 1) provides a visual reference for the two formats:
Figure 1: M.2 SSD hard drives
The table below provides additional information about the slots available on the OptiPlex 3050, and support considerations for each configuration (Figure 2):
Figure 2: OptiPlex 3050 slot configuration
Figure 1: M.2 SSD hard drives
The table below provides additional information about the slots available on the OptiPlex 3050, and support considerations for each configuration (Figure 2):
Figure 2: OptiPlex 3050 slot configuration
其他資訊
Recommended Articles
Here are some recommended articles related to this topic that might be of interest to you.
文章屬性
受影響的產品
OptiPlex 3050 Tower, OptiPlex 3050 Micro, OptiPlex 3050 Small Form Factor
上次發佈日期
27 7月 2024
版本
9
文章類型
Solution