How Do I Stop My Computer´s Microphone from Causing Feedback Through the Speakers?
摘要: Troubleshooting feedback through speakers when using your computers microphone.
本文适用于
本文不适用于
症状
原因
Not Applicable
解决方案
Mute the Microphone Input in the Volume Control Applet
To mute the microphone input in the Volume Control applet, follow the steps below:
- Open the Control Panel by typing in control in the Run Command box.
- Click Hardware and Sound > Change system sounds.
NOTE: This window may be titled Volume Control, Play Control, Control Out, or Sounds.
- If you see the Microphone device listed, then go to step 7.
NOTE: The Microphone device may also appear as Mic.
- On the Volume Control window, click on Options and then click Properties.
- Click on the Playback radio button.
- In the checklist, find and add the checkmark to Microphone and click OK.
- In the Volume Control window, find the Microphone device and add a check to the Mute box.
NOTE: With some sound cards, there may be Select boxes in place of the Mute boxes. If so, clear the Microphone device's Select box.
Back to Top
Speakers Causing Feedback
The microphone picks up sound from the speakers, and then it is played back through the computer's speakers. This can cause feedback, echo, and other sound issues.If the microphone input is activated in the Volume Control, sound picked up by the microphone is played through the speakers. The Volume Control applet controls the volumes of sound devices played through the speakers.
Back to Top
Go to our Audio and Speakers site for more information and support.
文章属性
文章编号: 000149193
文章类型: Solution
上次修改时间: 03 10月 2023
版本: 7
从其他戴尔用户那里查找问题的答案
支持服务
检查您的设备是否在支持服务涵盖的范围内。