How to use DSET 2.2 in Windows

摘要: DSET provides a good overview on the system's health including the logs from the Dell PowerEdge RAID controller to troubleshoot HDD or RAID related issues.

本文适用于本文不适用于本文并非针对某种特定的产品。本文并非包含所有产品版本。

症状

Notes:

DSET is end of life and can no longer be downloaded from the Dell Support site.
DSET was replaced by SupportAssist Enterprise as the primary collection tool to be used with Dell EMC technical support.
If you wish to still use the tool and have it downloaded steps are below.
How to use DSET 2.2 (Linux)

原因

The Dell Server E-Support Tool (DSET) allows you to generate a complete report about your system s configuration and logs, including the ;Server Event Log (SEL) and PowerEdge RAID Controller (PERC) log.

解决方案

Gather a DSET2.2 report in Windows:

Run Dell_DSET_2.2.0.118_A01.msi and execute the file by double-clicking it.

Note: DSET needs to be started with Administrator Rights.
First you will enter the Welcome Page. Click Next.

Figure 1: Welcome page
Accept the Software License Agreement, and click Next.

Figure 2: Software License Agreement
Now you see the Readme Information on the screen. Click Next.

Figure 3: Readme Information
On the Installation Type screen, select Create DSET Report only, then click Next.

Figure 4: The Installation Type Screen
You can enter User Information, but this is optional. Click Next.

Figure 5: User Information
On the Report Settings screen, you can specify where the DSET report is saved. The destination folder should already exist.
Select "Gathering Advanced Configuration Information" to generate advanced logs. Click Next.

Figure 6: Report Settings
On the next screen, do not check any of the provided options. Click Next.

Figure 7: Collection Settings

Note: If an option is checked, the information will not be included in the report. This can impact the diagnostic steps and the resolution of the issue.
The temporary files are now copied onto the system.

Figure 8: Progress of copying temporary files
The DSET tool will then start gathering the information requested. The creation of the DSET report can take up to 15 minutes to complete.

Figure 9: DSET gathers information
Once the DSET report is created, the name of the file will be displayed on the last screen. The report is protected with the password "dell" and stored on the desktop or the specified location (step 7). You can review the report or provide it when opening a ticket for an issue.