跳转至主要内容
  • 快速、轻松地下订单
  • 查看订单并跟踪您的发货状态
  • 创建并访问您的产品列表

How to Build a Partition for Dell BitLocker Manager / Dell Data Protection BitLocker Manager

摘要: A preboot authentication (PBA) partition may be created for Dell BitLocker Manager by following these instructions.

本文适用于 本文不适用于 本文并非针对某种特定的产品。 本文并非包含所有产品版本。

症状

This article provides steps to build a PBA partition for Dell BitLocker Manager (formerly Dell Data Protection BitLocker Manager).


Affected Products:

Dell BitLocker Manager
Dell Data Protection BitLocker Manager

Affected Operating Systems:

Windows


原因

Not applicable.

解决方案

Dell BitLocker Manager requires a PBA partition to securely unlock the operating system. Select the appropriate section below for steps to Create or Validate a PBA partition has been created.

To create a PBA partition:

  1. Type CMD into the Windows search bar.

Accessing Command Prompt

  1. Right-click Command Prompt and then click Run as administrator.

Running Command Prompt as administrator

  1. Type BdeHdCfg -target default and then press Enter.

BitLocker Drive Preparation Tool

  1. Type Y and then press Enter.

Continue

  1. Type shutdown -r -t 0 and then press Enter to reboot the endpoint.

Shutdown

To validate a PBA partition is created:

  1. Right-click the Windows start menu and then click Run.

Run

  1. In Run, type diskmgmt.msc and then click OK.

Run UI

  1. Confirm that a new partition has been created.

Checking partitions


To contact support, reference Dell Data Security International Support Phone Numbers.
Go to TechDirect to generate a technical support request online.
For additional insights and resources, join the Dell Security Community Forum.

受影响的产品

Dell Encryption
文章属性
文章编号: 000131537
文章类型: Solution
上次修改时间: 19 12月 2022
版本:  10
从其他戴尔用户那里查找问题的答案
支持服务
检查您的设备是否在支持服务涵盖的范围内。