How to Build a Partition for Dell BitLocker Manager / Dell Data Protection BitLocker Manager

摘要: A preboot authentication (PBA) partition may be created for Dell BitLocker Manager by following these instructions.

本文适用于本文不适用于本文并非针对某种特定的产品。本文并非包含所有产品版本。

症状

This article provides steps to build a PBA partition for Dell BitLocker Manager (formerly Dell Data Protection BitLocker Manager).

Affected Products:

Dell BitLocker Manager
Dell Data Protection BitLocker Manager

Affected Operating Systems:

Windows

原因

Not applicable.

解决方案

Dell BitLocker Manager requires a PBA partition to securely unlock the operating system. Select the appropriate section below for steps to Create or Validate a PBA partition has been created.

Create
Validate

To create a PBA partition:

Type CMD into the Windows search bar.

Accessing Command Prompt

Right-click Command Prompt and then click Run as administrator.

Running Command Prompt as administrator

Type BdeHdCfg -target default and then press Enter.

BitLocker Drive Preparation Tool

Type Y and then press Enter.

Continue

Type shutdown -r -t 0 and then press Enter to reboot the endpoint.

Shutdown

To validate a PBA partition is created:

Right-click the Windows start menu and then click Run.

Run

In Run, type diskmgmt.msc and then click OK.

Run UI

Confirm that a new partition has been created.

Checking partitions

To contact support, reference Dell Data Security International Support Phone Numbers.
Go to TechDirect to generate a technical support request online.
For additional insights and resources, join the Dell Security Community Forum.

受影响的产品

Dell Encryption

文章编号: 000131537

文章类型: Solution

上次修改时间: 19 12月 2022

版本: 10

How to Build a Partition for Dell BitLocker Manager / Dell Data Protection BitLocker Manager