How to Disable TLS 1.0 and TLS 1.1 on Dell Security Management Server and Dell Security Management Server Virtual

To ensure the security of communication to and from a Dell Security Management Server or Dell Security Management Server Virtual, it may be necessary to disable TLS 1.0 and TLS 1.1 for compliance with internal security requirements.

Affected Products:

Dell Security Management Server
Dell Security Management Server Virtual

Affected Versions:

v9.10.0 and Later

Affected Operating Systems:

Windows
Linux

Not applicable

In order to disable TLS 1.0 and TLS 1.1, Dell Data Security products must meet a minimum version requirement:

Product	Minimum Version to Disable TLS 1.0 and TLS 1.1
Dell Security Management Server	9.10
Dell Security Management Server Virtual	9.10
Preboot Authentication	8.16
CMG Administrative Utilities	8.16
Windows Shield	8.16
Windows Advanced Threat Prevention	1420
Client Security Framework	8.16
Windows Dell Data Guardian	1.3
iOS Dell Data Guardian	1.5
Android Dell Data Guardian	1.5 (1.6 for KitKat)
Dell Data Guardian Portal	1.3
Mac Dell Data Guardian	1.5
Mac Shield	8.17
Mac Advanced Threat Prevention	1.5
Linux Advanced Threat Prevention	1.0

For more information about disabling TLS, select either Dell Security Management Server, Dell Security Management Server Virtual, or the Front-End Server.

Dell Security Management Server

The process to disable TLS differs between versions. Select either version 11.3.0 and Later or versions 9.10.0 to 11.2.0 for specific steps. For versioning information, reference How to Identify the Dell Data Security / Dell Data Protection Server Version.

v11.3.0 and Later

TLS must be disabled from the Security Server, Device Server, and Core Server. For more information, select the appropriate function.

Security Server

Dell Security Server is a Java-based service. Modifying these values requires a restart to the service before the changes take effect.

Open ..\Dell\Enterprise Edition\Security Server\conf\spring-jetty.xml with a text editor and then go to <property name="excludeProtocols" value="SSL,SSLv2,SSLv3" />.

Alter <property name="excludeProtocols" value="SSL,SSLv2,SSLv3" /> to <property name="excludeProtocols" value="SSL,SSLv2,SSLv3,TLSv1,TLSv1.1" />.

Go to <bean id="clientAuthContextFactory"...>.

Add <property name="excludeProtocols" value="SSL,SSLv2,SSLv3,TLSv1,TLSv1.1" /> between the <property name="wantClientAuth" value="true" /> and <property name="excludeCipherSuites"> lines.

Save and exit.
Restart all services.

Note: For more information, reference How to Stop and Start Services in Dell Security Management Server.

Device Server

Dell Device Server is a Java-based service. Modifying these values requires a restart to the service before the changes take effect.

Open ..\Dell\Enterprise Edition\Device Server\conf\spring-jetty.xml with a text editor and then go to <property name="excludeProtocols" value="SSL,SSLv2,SSLv3" />.

Alter <property name="excludeProtocols" value="SSL,SSLv2,SSLv3" /> to <property name="excludeProtocols" value="SSL,SSLv2,SSLv3,TLSv1,TLSv1.1" />.

Save and exit.
Restart all services.

Note: For more information, reference How to Stop and Start Services in Dell Security Management Server.

Core Server

Dell Core Server service is a Microsoft .NET Framework based service. Modifying these settings also affects any other .NET Framework services that are hosted on this server and changes the core connectivity options for the operating system as a whole.

Note: For Core Server changes to take effect the host must be rebooted.

Right-click the Windows Start Menu and then select Run.

In the Run UI, type regedit and then press OK. This opens the Registry Editor.

Go to [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols].

Right-click protocols and then select New > Key.

Name the new key TLS 1.0. Repeat the process to create a second key that is named TLS 1.1 and a third that is named TLS 1.2.

Right-click the TLS 1.0 key and then select New > Key.

Name the new key Client.

Repeat Steps 6 and 7 to create a Client and Server key for TLS 1.0, TLS 1.1, and TLS 1.2.

Open HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.0\Server. Right-click the right pane and then select New > DWORD (32-bit) value.

Name the new DWORD Enabled and then set the value to 0.

Open HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.1\Server. Right-click the right pane and then select New > DWORD (32-bit) value.

Name the new DWORD Enabled and then set the value to 0.

Open HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.2\Client. Right-click the right pane and then select New > DWORD (32-bit) value.

Name the new DWORD DisabledByDefault and then set the value to 0.

Open HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.2\Server. Right-click the right pane and then select New > DWORD (32-bit) value.

Name the new DWORD Enabled and then set the value to 1.

Open HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\.NETFramework\v4.0.30319. Right-click the right pane and then select New > DWORD (32-bit) value.

Name the new DWORD SchUseStrongCrypto and then set the value to 1.

Note: SchUseStrongCrypto forces all .NET Framework applications to use strong cryptographic functions when they make TLS calls. For more information, reference https://docs.microsoft.com/en-us/dotnet/framework/network-programming/tls#schusestrongcrypto

This hyperlink is taking you to a website outside of Dell Technologies.

.

Open HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\.NETFramework\v4.0.30319. Right-click the right pane and then select New > DWORD (32-bit) value.

Name the new DWORD SchUseStrongCrypto and then set the value to 1.

Restart the server for the changes to take effect.

v9.10.0 to 11.2.0

TLS must be disabled from the Security Server, Device Server, Compliance Reporter, and Core Server. For more information, select the appropriate function.

Security Server

Dell Security Server is a Java-based service. Modifying these values requires a restart to the service before the changes take effect.

Open ..\Dell\Enterprise Edition\Security Server\conf\spring-jetty.xml with a text editor and then go to <property name="excludeProtocols" value="SSL,SSLv2,SSLv3" />.

Alter <property name="excludeProtocols" value="SSL,SSLv2,SSLv3" /> to <property name="excludeProtocols" value="SSL,SSLv2,SSLv3,TLSv1,TLSv1.1" />.

Go to <bean id="clientAuthContextFactory"...>.

Add <property name="excludeProtocols" value="SSL,SSLv2,SSLv3,TLSv1,TLSv1.1" /> between the <property name="wantClientAuth" value="true" /> and <property name="excludeCipherSuites"> lines.

Save and exit.
Restart all services.

Note: For more information, reference How to Stop and Start Services in Dell Security Management Server.

Device Server

Dell Device Server is a Java-based service. Modifying these values requires a restart to the service before the changes take effect.

Open ..\Dell\Enterprise Edition\Device Server\conf\spring-jetty.xml with a text editor and then go to <property name="excludeProtocols" value="SSL,SSLv2,SSLv3" />.

Alter <property name="excludeProtocols" value="SSL,SSLv2,SSLv3" /> to <property name="excludeProtocols" value="SSL,SSLv2,SSLv3,TLSv1,TLSv1.1" />.

Save and exit.
Restart all services.

Note: For more information, reference How to Stop and Start Services in Dell Security Management Server.

Compliance Reporter

Dell Compliance Reporter is a Java-based service. Modifying these values requires a restart to the service before the changes take effect.

Open ..\Dell\Enterprise Edition\Compliance Reporter\conf\eserver.properties with a text editor and then go to eserver.ssl.protocols=TLSv1, TLSv1.1, TLSv1.2.

Modify eserver.ssl.protocols=TLSv1, TLSv1.1, TLSv1.2 to eserver.ssl.protocols=TLSv1.2.

Save and exit.
Restart all services.

Note: For more information, reference How to Stop and Start Services in Dell Security Management Server.

Core Server

Dell Core Server service is a Microsoft .NET Framework based service. Modifying these settings also affects any other .NET Framework services that are hosted on this server and changes the core connectivity options for the operating system as a whole.

Note: For Core Server changes to take effect the host must be rebooted.

Right-click the Windows Start Menu and then select Run.

In the Run UI, type regedit and then press OK. This opens the Registry Editor.

Go to [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols].

Right-click protocols and then select New > Key.

Name the new key TLS 1.0. Repeat the process to create a second key that is named TLS 1.1 and a third that is named TLS 1.2.

Right-click the TLS 1.0 key and then select New > Key.

Name the new key Client.

Repeat Steps 6 and 7 to create a Client and Server key for TLS 1.0, TLS 1.1, and TLS 1.2.

Open HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.0\Server. Right-click the right pane and then select New > DWORD (32-bit) value.

Name the new DWORD Enabled and then set the value to 0.

Open HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.1\Server. Right-click the right pane and then select New > DWORD (32-bit) value.

Name the new DWORD Enabled and then set the value to 0.

Open HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.2\Client. Right-click the right pane and then select New > DWORD (32-bit) value.

Name the new DWORD DisabledByDefault and then set the value to 0.

Open HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.2\Server. Right-click the right pane and then select New > DWORD (32-bit) value.

Name the new DWORD Enabled and then set the value to 1.

Open HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\.NETFramework\v4.0.30319. Right-click the right pane and then select New > DWORD (32-bit) value.

Name the new DWORD SchUseStrongCrypto and then set the value to 1.

Note: SchUseStrongCrypto forces all .NET Framework applications to use strong cryptographic functions when they make TLS calls. For more information, reference https://docs.microsoft.com/en-us/dotnet/framework/network-programming/tls#schusestrongcrypto

.

Open HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\.NETFramework\v4.0.30319. Right-click the right pane and then select New > DWORD (32-bit) value.

Name the new DWORD SchUseStrongCrypto and then set the value to 1.

Restart the server for the changes to take effect.

Dell Security Management Server Virtual

The process to disable TLS differs between versions. Select either version 11.3.0 and Later, versions 9.11.0 to 11.2.0, or versions 9.10.0 to 9.10.1 for specific steps. For versioning information, reference How to Identify the Dell Data Security / Dell Data Protection Server Version.

v11.3.0 and Later

TLS must be disabled from the Security Server, Identity Server, and Core Server Proxy. For more information, select the appropriate function.

Security Server

Dell Security Server is a Java-based service. Modifying these values requires a restart to the service before the changes take effect.

Log in to the Dell Security Management Server Virtual administration console.

Note:

The default credentials for Dell Security Management Server Virtual are:
- Username: delluser
- Password: delluser
An administrator can change the default password within the product’s virtual appliance menu.

From the Main Menu, select Launch Shell and the press Enter.

Change the user to dellsupport using the su dellsupport command.

Confirm the password for the dellsupport user.

Open /opt/dell/server/security-server/conf/spring-jetty.xml using the command sudo nano /opt/dell/server/security-server/conf/spring-jetty.xml.

Alter <property name="excludeProtocols" value="SSL,SSLv2,SSLv3" /> to <property name="excludeProtocols" value="SSL,SSLv2,SSLv3,TLSv1,TLSv1.1" />.

Go to <bean id="clientAuthContextFactory"...>.

Add <property name="excludeProtocols" value="SSL,SSLv2,SSLv3,TLSv1,TLSv1.1" /> between the <property name="wantClientAuth" value="true" /> and <property name="excludeCipherSuites"> lines.

Press CTRL + X to exit.

Press Y to save the changes and then press Enter to confirm the file name.

Type exit and press Enter to log out of dellsupport.

Type exit and then press Enter to log out of the shell to the Main Menu.

Restart all services.

Note: For more information, reference How to Stop and Start Services in Dell Security Management Server Virtual.

Identity Server

Dell Identity Server service is a mono-based service. Modifying these values requires a restart to the server before the changes take effect.

Log in to the Dell Security Management Server Virtual administration console.

Note:

The default credentials for Dell Security Management Server Virtual are:
- Username: delluser
- Password: delluser
An administrator can change the default password within the product’s virtual appliance menu.

From the Main Menu, select Launch Shell and then press Enter.

Change the user to dellsupport using the su dellsupport command.

Confirm the password for the dellsupport user.

Open /opt/dell/server/local-server/conf/spring-jetty.xml with a text editor using the command sudo nano /opt/dell/server/local-server/conf/spring-jetty.xml.

Go to <property name="excludeProtocols" value="SSL,SSLv2,SSLv3" />.

Alter <property name="excludeProtocols" value="SSL,SSLv2,SSLv3" /> to <property name="excludeProtocols" value="SSL,SSLv2,SSLv3,TLSv1,TLSv1.1" />.

Press CTRL + X to exit.

Press Y to save the changes and then press Enter to confirm the file name.

Type exit and then press Enter to log out of dellsupport.

Type exit and then press Enter to log out of the shell to the Main Menu.

Restart the server for the changes to take effect.

Core Server Proxy

Dell Core Server Proxy service is a Java-based service. Modifying these values requires a restart to the service before the changes take effect.

Log in to the Dell Security Management Server Virtual administration console.

Note:

The default credentials for Dell Security Management Server Virtual are:
- Username: delluser
- Password: delluser
An administrator can change the default password within the product’s virtual appliance menu.

From the Main Menu, select Launch Shell and then press Enter.

Change the user to dellsupport using the su dellsupport command.

Confirm the password for the dellsupport user.

Open /opt/dell/server/core-server-proxy/conf/spring-jetty.xml with a text editor using the command sudo nano /opt/dell/server/core-server-proxy/conf/spring-jetty.xml.

Go to <property name="excludeProtocols" value="SSL,SSLv2,SSLv3" />.

Alter <property name="excludeProtocols" value="SSL,SSLv2,SSLv3" /> to <property name="excludeProtocols" value="SSL,SSLv2,SSLv3,TLSv1,TLSv1.1" />.

Press CTRL + X to exit.

Press Y to save the changes and then press Enter to confirm the file name.

Type exit and then press Enter to return to log out of dellsupport.

Type exit and then press Enter to log out of the shell to the Main Menu.

Restart all services.

v9.11.0 to 11.2.0

TLS must be disabled from the Security Server, Identity Server, Compliance Reporter, and Core Server Proxy. For more information, select the appropriate function.

Security Server

Dell Security Server is a Java-based service. Modifying these values requires a restart to the service before the changes take effect.

Log in to the Dell Security Management Server Virtual administration console.

Note:

The default credentials for Dell Security Management Server Virtual are:
- Username: delluser
- Password: delluser
An administrator can change the default password within the product’s virtual appliance menu.

From the Main Menu, select Launch Shell and the press Enter.

Change the user to dellsupport using the su dellsupport command.

Confirm the password for the dellsupport user.

Open /opt/dell/server/security-server/conf/spring-jetty.xml using the command sudo nano /opt/dell/server/security-server/conf/spring-jetty.xml.

Alter <property name="excludeProtocols" value="SSL,SSLv2,SSLv3" /> to <property name="excludeProtocols" value="SSL,SSLv2,SSLv3,TLSv1,TLSv1.1" />.

Go to <bean id="clientAuthContextFactory"...>.

Add <property name="excludeProtocols" value="SSL,SSLv2,SSLv3,TLSv1,TLSv1.1" /> between the <property name="wantClientAuth" value="true" /> and <property name="excludeCipherSuites"> lines.

Press CTRL + X to exit.

Press Y to save the changes and then press Enter to confirm the file name.

Type exit and press Enter to log out of dellsupport.

Type exit and then press Enter to log out of the shell to the Main Menu.

Restart all services.

Note: For more information, reference How to Stop and Start Services in Dell Security Management Server Virtual.

Identity Server

Dell Identity Server service is a mono-based service. Modifying these values requires a restart to the server before the changes take effect.

Log in to the Dell Security Management Server Virtual administration console.

Note:

The default credentials for Dell Security Management Server Virtual are:
- Username: delluser
- Password: delluser
An administrator can change the default password within the product’s virtual appliance menu.

From the Main Menu, select Launch Shell and then press Enter.

Change the user to dellsupport using the su dellsupport command.

Confirm the password for the dellsupport user.

Open /opt/dell/server/local-server/conf/spring-jetty.xml with a text editor using the command sudo nano /opt/dell/server/local-server/conf/spring-jetty.xml.

Go to <property name="excludeProtocols" value="SSL,SSLv2,SSLv3" />.

Alter <property name="excludeProtocols" value="SSL,SSLv2,SSLv3" /> to <property name="excludeProtocols" value="SSL,SSLv2,SSLv3,TLSv1,TLSv1.1" />.

Press CTRL + X to exit.

Press Y to save the changes and then press Enter to confirm the file name.

Type exit and then press Enter to log out of dellsupport.

Type exit and then press Enter to log out of the shell to the Main Menu.

Restart the server for the changes to take effect.

Compliance Reporter

Dell Compliance Reporter service is a Java-based service. Modifying these values requires a restart to the service before the changes take effect.

Log in to the Dell Security Management Server Virtual administration console.

Note:

The default credentials for Dell Security Management Server Virtual are:
- Username: delluser
- Password: delluser
An administrator can change the default password within the product’s virtual appliance menu.

From the Main Menu, select Launch Shell and then press Enter.

Change the user to dellsupport using the su dellsupport command.

Confirm the password for the dellsupport user.

Open /opt/dell/server/reporter/conf/eserver.properties with a text editor using the command: sudo nano /opt/dell/server/reporter/conf/eserver.properties.
Go to eserver.ssl.protocols=TLSv1, TLSv1.1, TLSv1.2.

Modify eserver.ssl.protocols=TLSv1, TLSv1.1, TLSv1.2 to read eserver.ssl.protocols=TLSv1.2.

Press CTRL + X to exit.

Press Y to save the changes and then press Enter to confirm the file name.

Type exit and then press Enter to log out of dellsupport.

Type exit and then press Enter to log out of the shell to the Main Menu.

Restart all services.

Note: For more information, reference How to Stop and Start Services in Dell Security Management Server Virtual.

Core Server Proxy

Dell Core Server Proxy service is a Java-based service. Modifying these values requires a restart to the service before the changes take effect.

Log in to the Dell Security Management Server Virtual administration console.

Note:

The default credentials for Dell Security Management Server Virtual are:
- Username: delluser
- Password: delluser
An administrator can change the default password within the product’s virtual appliance menu.

From the Main Menu, select Launch Shell and then press Enter.

Change the user to dellsupport using the su dellsupport command.

Confirm the password for the dellsupport user.

Open /opt/dell/server/core-server-proxy/conf/spring-jetty.xml with a text editor using the command sudo nano /opt/dell/server/core-server-proxy/conf/spring-jetty.xml.

Go to <property name="excludeProtocols" value="SSL,SSLv2,SSLv3" />.

Alter <property name="excludeProtocols" value="SSL,SSLv2,SSLv3" /> to <property name="excludeProtocols" value="SSL,SSLv2,SSLv3,TLSv1,TLSv1.1" />.

Press CTRL + X to exit.

Press Y to save the changes and then press Enter to confirm the file name.

Type exit and then press Enter to return to log out of dellsupport.

Type exit and then press Enter to log out of the shell to the Main Menu.

Restart all services.

Note: For more information, reference How to Stop and Start Services in Dell Security Management Server Virtual.

v9.10.0 to 9.10.1

TLS must be disabled from the Security Server, Identity Server, Compliance Reporter, and Core Server Proxy. For more information, select the appropriate function.

Security Server

Dell Security Server service is a Java-based service. Modifying these values requires a restart to the service before the changes take effect.

Log in to the Dell Security Management Server Virtual administration console.

Note:

The default credentials for Dell Security Management Server Virtual are:
- Username: delluser
- Password: delluser
An administrator can change the default password within the product’s virtual appliance menu.

From the Main Menu, select Launch Shell and then press Enter.

Change the user to ddpsupport using the su ddpsupport command.

Confirm the password for the ddpsupport user.

Open /opt/dell/server/security-server/conf/spring-jetty.xml using the command sudo nano /opt/dell/server/security-server/conf/spring-jetty.xml.

Go to <property name="excludeProtocols" value="SSL,SSLv2,SSLv3">.

Alter <property name="excludeProtocols" value="SSL,SSLv2,SSLv3" /> to <property name="excludeProtocols" value="SSL,SSLv2,SSLv3,TLSv1,TLSv1.1" />.

Go to <bean id="clientAuthContextFactory"...>.

Add <property name="excludeProtocols" value="SSL,SSLv2,SSLv3,TLSv1,TLSv1.1" /> between the <property name="wantClientAuth" value="true" /> and <property name="excludeCipherSuites"> lines.

Press CTRL + X to exit.

Press Y to save the changes and then press Enter to confirm the file name.

Type exit and then press Enter to log out of ddpsupport.

Type exit and then press Enter to log out of the shell to the Main Menu.

Restart all services.

Note: For more information, reference How to Stop and Start Services in Dell Security Management Server Virtual.

Identity Server

Dell Identity Server service is a mono-based service. Modifying these values requires a restart to the server before the changes take effect.

Log in to the Dell Security Management Server Virtual administration console.

Note:

The default credentials for Dell Security Management Server Virtual are:
- Username: delluser
- Password: delluser
An administrator can change the default password within the product’s virtual appliance menu.

From the Main Menu, select Launch Shell and then press Enter.

Change the user to ddpsupport using the su ddpsupport command.

Confirm the password for the ddpsupport user.

Open /opt/dell/server/local-server/conf/spring-jetty.xml with a text editor using the command sudo nano /opt/dell/server/local-server/conf/spring-jetty.xml.

Go to <property name="excludeProtocols" value="SSL,SSLv2,SSLv3" />.

Alter <property name="excludeProtocols" value="SSL,SSLv2,SSLv3" /> to <property name="excludeProtocols" value="SSL,SSLv2,SSLv3,TLSv1,TLSv1.1" />.

Press CTRL + X to exit.

Press Y to save the changes and then press Enter to confirm the file name.

Type exit and then press Enter to log out of ddpsupport.

Type exit and then press Enter to log out of the shell to the Main Menu.

Restart the server for the changes to take effect.

Compliance Reporter

Dell Compliance Reporter service is a Java-based service. Modifying these values requires a restart to the service before the changes take effect.

Log in to the Dell Security Management Server Virtual administration console.

Note:

The default credentials for Dell Security Management Server Virtual are:
- Username: delluser
- Password: delluser
An administrator can change the default password within the product’s virtual appliance menu.

From the Main Menu, select Launch Shell and then press Enter.

Change the user to ddpsupport using the su ddpsupport command.

Confirm the password for the ddpsupport user.

Open /opt/dell/server/reporter/conf/eserver.properties with a text editor using the command sudo nano /opt/dell/server/reporter/conf/eserver.properties.

Go to eserver.ssl.protocols=TLSv1, TLSv1.1, TLSv1.2.

Modify eserver.ssl.protocols=TLSv1, TLSv1.1, TLSv1.2 to read eserver.ssl.protocols=TLSv1.2.

Press CTRL + X to exit.

Press Y to save the changes and then press Enter to confirm the file name.

Type exit and then press Enter to log out of ddpsupport.

Type exit and then press Enter to log out of the shell to the Main Menu.

Restart all services.

Note: For more information, reference How to Stop and Start Services in Dell Security Management Server Virtual.

Core Server Proxy

Dell Core Server Proxy service is a Java-based service. Modifying these values requires a restart to the service before the changes take effect.

Log in to the Dell Security Management Server Virtual administration console.

Note:

The default credentials for Dell Security Management Server Virtual are:
- Username: delluser
- Password: delluser
An administrator can change the default password within the product’s virtual appliance menu.

From the Main Menu, select Launch Shell and then press Enter.

Change the user to ddpsupport using the su ddpsupport command.

Confirm the password for the ddpsupport user.

Open /opt/dell/server/core-server-proxy/conf/spring-jetty.xml with a text editor using the command sudo nano /opt/dell/server/core-server-proxy/conf/spring-jetty.xml.

Go to <property name="excludeProtocols" value="SSL,SSLv2,SSLv3" />.

Alter <property name="excludeProtocols" value="SSL,SSLv2,SSLv3" /> to <property name="excludeProtocols" value="SSL,SSLv2,SSLv3,TLSv1,TLSv1.1" />.

Press CTRL + X to exit.

Press Y to save the changes and then press Enter to confirm the file name.

Type exit and then press Enter to log out of ddpsupport.

Type exit and then press Enter to log out of the shell to the Main Menu.

Restart all services.

Note: For more information, reference How to Stop and Start Services in Dell Security Management Server Virtual.

Front-End Server

TLS must be disabled from the Security Server Proxy, Device Server, and Core Server Proxy. For more information, select the appropriate function.

Security Server Proxy

Dell Security Server Proxy service is a Java-based service. Modifying these values requires a restart to the service before the changes take effect.

Open ..\Dell\Enterprise Edition\Security Server Proxy\conf\spring-jetty.xml with a text editor and then go to <property name="excludeProtocols" value="SSL,SSLv2,SSLv3" />.

Alter <property name="excludeProtocols" value="SSL,SSLv2,SSLv3" /> to <property name="excludeProtocols" value="SSL,SSLv2,SSLv3,TLSv1,TLSv1.1" />.

Save and exit.
Restart all services.

Note: For more information, reference How to Stop and Start Services in Dell Security Management Server.

Device Server

Dell Device Server service is a Java-based service. Modifying these values requires a restart to the service before the changes take effect.

Open ..\Dell\Enterprise Edition\Device Server\conf\spring-Jetty.xml with a text editor and then go to <property name="excludeProtocols" value="SSL,SSLv2,SSLv3" />.

Alter <property name="excludeProtocols" value="SSL,SSLv2,SSLv3" /> to <property name="excludeProtocols" value="SSL,SSLv2,SSLv3,TLSv1,TLSv1.1" />.

Save and exit.
Restart all services.

Note: For more information, reference How to Stop and Start Services in Dell Security Management Server.

Core Server Proxy

Dell Core Server Proxy service is a Java-based service. Modifying these values requires a restart to the service before the changes take effect.

Open ..\Dell\Enterprise Edition\Core Server Proxy\conf\spring-jetty.xml with a text editor and then go to <property name="excludeProtocols" value="SSL,SSLv2,SSLv3" />.

Alter <property name="excludeProtocols" value="SSL,SSLv2,SSLv3" /> to <property name="excludeProtocols" value="SSL,SSLv2,SSLv3,TLSv1,TLSv1.1" />.

Save and exit.
Restart all services.

Note: For more information, reference How to Stop and Start Services in Dell Security Management Server.

To contact support, reference Dell Data Security International Support Phone Numbers.
Go to TechDirect to generate a technical support request online.
For additional insights and resources, join the Dell Security Community Forum.

欢迎

欢迎访问戴尔

How to Disable TLS 1.0 and TLS 1.1 on Dell Security Management Server and Dell Security Management Server Virtual

摘要: TLS 1.0 and TLS 1.1 can be disabled on Dell Security Management Server and Dell Security Management Server Virtual by following these instructions.

详细文章

症状

原因

解决方案

受影响的产品

症状

Affected Products:

Affected Versions:

Affected Operating Systems:

原因

解决方案

Dell Security Management Server

v11.3.0 and Later

v9.10.0 to 11.2.0

Dell Security Management Server Virtual

v11.3.0 and Later

v9.11.0 to 11.2.0

v9.10.0 to 9.10.1

Front-End Server

受影响的产品

文章属性

从其他戴尔用户那里查找问题的答案

支持服务

文章属性

从其他戴尔用户那里查找问题的答案

支持服务