Ana içeriğe atla
Oturumu Kapat

Dell'e Hoş Geldiniz

Hesabım
  • Hızla ve kolayca sipariş verin
  • Siparişleri görüntüleyin ve kargonuzun durumunu izleyin
  • Ürünlerinizin listesini oluşturun ve listeye erişin
Oturum Aç Hesap oluşturun Premier Oturum Açma İş Ortağı Programı Oturum Açma
Bize Ulaşın

Trusted Platform Module (TPM) Upgrade or Downgrade Process for Windows 10 Operating System

Summary: This article covers TPM changes in Windows 10 when upgrading or downgrading.

Bu makale şunlar için geçerlidir: Bu makale şunlar için geçerli değildir: Bu makale, belirli bir ürüne bağlı değildir. Bu makalede tüm ürün sürümleri tanımlanmamıştır.
Diğer kaynaklara göz atın

Instructions

Operating system change requires TPM Upgrade or Downgrade

Select Dell systems require a matching TPM upgrade or downgrade if the operating system is upgraded or downgraded between Windows 10.

  • Legacy Boot Mode systems require TPM 1.2.
  • UEFI Mode systems work with both TPM 2.0 and 1.2.

For more Information on how to switch the TPM Version, refer to the article How to troubleshoot and resolve common issues with TPM and BitLocker.

Applicable systems:

  • Dell Edge Gateway 5000
  • Dell Edge Gateway 5000 OEM Ready
  • Dell Edge Gateway 5100
  • Dell Edge Gateway 5100 OEM Ready
  • Dell Precision Tower 3420
  • Dell Precision Tower 3620
  • Dell Precision Tower T5810/5810XL *
  • Dell Precision Tower T7810 *
  • Dell Precision Tower T7910 *
  • Latitude 7370
  • Latitude E5270
  • Latitude E5470
  • Latitude E5570
  • Latitude E7270
  • Latitude E7470
  • OptiPlex 3040
  • OptiPlex 3240 All-in-One
  • OptiPlex 5040
  • OptiPlex 7040
  • OptiPlex 7440 AIO
  • OptiPlex 5050
  • Precision 3510
  • Precision 7510
  • Precision 7710
  • XPS 15 9550
NOTE: *In order to upgrade to TPM 2.0, if you operate these specific Precision systems need to update BIOS to the latest version A14 (as of 15 August 2016) and apply the TPM firmware patch or update 1.3.0.1.
 
NOTE: This does not apply to the Dell Precision Rack R7910/7910XL. These are Enterprise class systems and the TPM module is a point of sale configuration that is embedded in the system board and is not field upgradable.
 

How to update the TPM

 
NOTE: Ensure that the system has AC adapter plugged into the system when performing this task. Any power disruption that occurs may cause damage to TPM module during upgrade/downgrade. When this occurs end user will not have access to data in hard drive and system will not be usable.
 

Systems that shipped with Windows 10 from the factory will have TPM 2.0. These systems will need the Dell TPM 1.2 Update Utility from the Dell Support Website to downgrade the TPM to firmware version 1.2.
Drivers and downloads > Category: Security > Dell TPM 1.2 Firmware Update Utility

The installation instructions for each update utility are listed in the Installation Instructions section near the bottom of the download page.

 
NOTE: You will need to provide a bootable DOS USB key. This executable file does not create the DOS system files.
 
NOTE: If BitLocker is enabled on your system, please make sure you suspend BitLocker encryption before updating TPM on a BitLocker enabled system.
 
NOTE: On systems with DDPE installed:
  1. Open the Services Desktop App (Type services.msc in the search box, then press the Enter key)
  2. Set the DellMgmtAgent Windows service to Disabled
  3. Stop the DellMgmtAgent Windows service
  4. Set the DellMgmtLoader Windows service to Disabled
  5. Stop the DellMgmtLoader Windows service
  6. Proceed with clearing the TPM
  7. After Clearing TPM
  8. Set the DellMgmtLoader Windows service to Automatic
  9. Start the DellMgmtLoader Windows service
  10. Set the DellMgmtAgent Windows service to Automatic
  11. Start the DellMgmtAgent Windows service
 
NOTE: The TPM must be ON and Enabled in BIOS Setup, and the TPM must not be owned. If the TPM is owned, go to BIOS Setup and clear the TPM before proceeding. You may need to run TPM.msc to re-initial the TPM under Windows OS.
 
NOTE: When the TPM ownership is cleared, some operating system will automatically take ownership of the TPM on the next boot (TPM AutoProvisioning). This feature will need to be disabled in the OS to proceed with the update.

Additional Information

Recommended Articles

Here are some recommended articles related to this topic that might be of interest to you.

Etkilenen Ürünler

Gateways & Embedded PCs, Embedded Box PCs, Edge Gateways, Dell Edge Gateway 5000, Dell Edge Gateway 5100, Latitude 7370, Latitude E5270, Latitude E5470, Latitude E5570, Latitude E7270, Latitude E7470, OptiPlex 3040 Micro , OptiPlex 3040 Small Form Factor, OptiPlex 3040 Tower, OptiPlex 3240 All-in-One, OptiPlex 5040 Tower, OptiPlex 5040 Small Form Factor, OptiPlex 5050 Tower, OptiPlex 5050 Micro, OptiPlex 5050 Small Form Factor, OptiPlex 7040 Tower, OptiPlex 7040 Micro, OptiPlex 7040 Small Form Factor, OptiPlex 7440 All-In-One, Dell Edge Gateway 5000 OEM Ready, Dell Edge Gateway 5100 OEM Ready, Dell Embedded Box PC 5000 OEM, R7910 XL, T5810 XL, Precision 3510, Precision 7510, Precision 7710, Precision Rack 7910, Dell Precision Tower 3420, Dell Precision Tower 3620, Precision Tower 5810, Dell Precision Tower 7810, Precision Tower 7910, XPS 13 9350 (End of Life), XPS 15 9550 ...
Makale Özellikleri
Article Number: 000126503
Article Type: How To
Son Değiştirme: 19 Ara 2023
Version:  8
Sorularınıza diğer Dell kullanıcılarından yanıtlar bulun
Destek Hizmetleri
Aygıtınızın Destek Hizmetleri kapsamında olup olmadığını kontrol edin.