Gå vidare till huvudinnehållet
Logga ut

Välkommen till Dell

Mitt konto
  • Lägg beställningar snabbt och enkelt
  • Visa beställningar och kontrollera leveransstatus
  • Skapa och kom åt en lista över dina produkter
Logga in Skapa ett konto Premier-inloggning Partner Program-inloggning
Kontakta oss

Dina kundvagnar på Dell.com

Download the Broadcom USH Drivers

Sammanfattning: See the wanted section for help with installing the drivers for the Broadcom Unified Security Hub (USH) w/swipe sensor. Or help with how to resolve unknown devices issues after a clean install of Windows. ...

Den här artikeln gäller för Den här artikeln gäller inte för Den här artikeln är inte kopplad till någon specifik produkt. Alla produktversioner identifieras inte i den här artikeln.
Kolla in andra resurser

Instruktioner

NOTE: The Broadcom USH driver is part of the Dell ControlVault Driver. See the Obtaining Broadcom Unified Security Hub (USH) W/Swipe Sensor Drivers section for instructions on downloading the specific Dell ControlVault Driver for your computer.

Table of Contents:

  1. Obtaining Broadcom Unified Security Hub (USH) W/Swipe Sensor Drivers
  2. Resolving Unknown Devices Issues After a Clean Install of Windows

1. Obtaining Broadcom Unified Security Hub (USH) W/Swipe Sensor Drivers

  1. Browse to the Dell Support website.
  2. You are given three options to identify your computer.

    Either:

    • Select the listing for your computer under THIS personal computer.
      Note: When there is no listing for your computer under THIS personal computer, Select Download & Install SupportAssist, which will automatically identify your computer for you. Follow the prompts to download and install SupportAssist.
    • Enter the Service Tag, Dell EMC Product ID, or Model, and then Select the Search button and select your computer from the list.
    • Select Browse all products: select the type of device you have, the brand name, and then the product model.
      Note: For more information, see Dell Knowledge Base article, How to Determine the Model Number of Your Dell Computer, or the video below.
  3. Select the DRIVERS & DOWNLOADS tab.
  4. Using the drop-down menu under Category, select Security.
  5. When available, the Broadcom USH w/swipe sensor drivers are in the Dell ControlVault Driver, Dell ControlVault2 Driver and Firmware, or Dell ControlVault3 Driver and Firmware files.
  6. Select Download to the right on the driver listing.
    Note: When a firmware is also offered, download both the firmware and driver and install the firmware first.
  7. Once the driver or firmware page opens, see the Installation instructions that are located at the bottom of the page.

Back to Top

2. Resolving Unknown Devices Issues After a Clean Install of Windows

After a clean install of Windows, there may be one or more listings in Device Manager that read as an Unknown device.

To resolve these, install all the drivers available in the Chipset category available for your computer on the Dell Support website. For more information, see Dell Knowledge Base article Drivers and Downloads FAQs

Note: Dell also has an automated detection tool that may be offered for your computer that detects required drivers and utilities updates and also installs them on your Dell computer. For more information, see the Dell Knowledge Base article Drivers by System Analysis or Detect Drivers.

Back to Top

Ytterligare information

Recommended Articles

Here are some recommended articles related to this topic that might be of interest to you.

Berörda produkter

G Series, Alienware, Inspiron, Latitude, Vostro, XPS, Legacy Laptop Models
Artikelegenskaper
Artikelnummer: 000181127
Artikeltyp: How To
Senast ändrad: 21 aug. 2024
Version:  12
Få svar på dina frågor från andra Dell-användare
Supporttjänster
Kontrollera om din enhet omfattas av supporttjänster.