How to identify the iDRAC version embedded in a PowerEdge server and hardware leveraging PowerEdge server hardware
Sammanfattning: Most PowerEdge servers have an embedded Integrated Dell Remote Access Controller (iDRAC). Some storage, hyper-converged, solution hardware products leverage the PowerEdge servers hardware also have an embedded iDRAC. This article helps to quickly identify the iDRAC version. ...
Den här artikeln gäller för
Den här artikeln gäller inte för
Den här artikeln är inte kopplad till någon specifik produkt.
Alla produktversioner identifieras inte i den här artikeln.
Symptom
Most PowerEdge servers and other products leverage a PowerEdge server hardware have an embedded Integrated Dell Remote Access Controller.
Identify the iDRAC version based on PowerEdge model
The Dell PowerEdge servers by generation lists PowerEdge server models including the embedded iDRAC. This will not provide the license level.Identify iDRAC version using the iDRAC Web Interface
Log in to the iDRAC interface. The default iDRAC IP address 192.168.0.120. Upon login, the version is displayed at the upper left of the iDRAC along with the iDRAC license level.
Figure 1: iDRAC9
Figure 2: iDRAC8
In addition to the version of iDRAC embedded in the PowerEdge server model, iDRAC features are available based on the license level. Additional information on licensing is available in the Support for Integrated Dell Remote Access Controller 7 (iDRAC7) , Support for Integrated Dell Remote Access Controller 8 (iDRAC8) , and Support for Integrated Dell Remote Access Controller 9 (iDRAC9) ; Licensing section.
Orsak
Dell
Upplösning
Dell Technologies
Produkter
DRAC4, DRAC5, iDRAC6, iDRAC7, iDRAC8, iDRAC9Artikelegenskaper
Artikelnummer: 000177885
Artikeltyp: Solution
Senast ändrad: 14 mars 2023
Version: 7
Få svar på dina frågor från andra Dell-användare
Supporttjänster
Kontrollera om din enhet omfattas av supporttjänster.