Resolving High CPU Temperature Issues on Alienware Laptops

The following article provides information about an issue with high CPU temperatures. Alerts of high CPU temperatures may occur when the computer is under a heavy load. Running the Alienware Command Center that measures the thermal temperature on these Alienware laptops can help with troubleshooting the high CPU temperatures. Follow these instructions if you are experiencing an Alienware laptop overheating.

Affected Platforms:

Alienware 13 R3
Alienware 15 R3
Alienware 15 R4
Alienware 17 R4
Alienware 17 R5
Alienware m15
Alienware m15 R2
Alienware m15 R3
Alienware m17
Alienware m17 R2
Alienware m17 R3
Alienware Area-51m
Alienware Area-51m R2

High CPU temperatures on Alienware laptops

There are reports that the CPU temperature on Alienware 13 R3, 15 R3 and R4, 17 R4 and R5, m15, m15 R2, m15 R3 m17, m17 R2, m17 R3, Area-51m, and Area-51m R2 laptops are reaching high temperatures. This may happen more frequently when the computer is under a heavy load. The alert or warning (text in red) of the high CPU temperature may be seen when the Alienware Command Center (AWCC) measures the temperature.

How to Troubleshoot High CPU Temperatures

Update the BIOS, drivers, and firmware to the most recent revisions from https://www.dell.com/support/, and then select the appropriate model for the next steps.

Note:

For more information about how to download and update the BIOS, reference Dell BIOS Updates.
For more information about how to download and update drivers, reference How to Download and Install Dell Drivers.

Alienware 13 R3, 15 R3, and 17 R4

Configure the G-SYNC settings.
Note: This step is only applicable on G-SYNC supported models.
1. Disable the NVIDIA G-SYNC.
  1. Right-click the desktop.
  2. Select the NVIDIA Control Panel.
  3. Click Set up G-SYNC in the left side menu.
  4. Clear the checkbox next to Enable G-SYNC.
  5. Click Apply.
2. Restart the computer and enter the BIOS by tapping rapidly on the F2 key during POST.
3. Go to the Advanced tab and select Performance Options and press the Enter key.
4. Change the CPU Performance Mode to Enabled.
5. Set the Core Over-Clocking Level to OC LV 3 and then press the Enter key.
6. Press the F10 key to save the changes and exit the BIOS.
When the computer finishes booting, using the preinstalled Dell SupportAssist software, run the CPU stress test. From Dell SupportAssist, click Hardware Checkup, CPU, and then CPU stress test.

Launch the Alienware Command Center and go to Fusion and monitor the CPU frequency. Ensure that the CPU frequency is within the range that is identified in the table below during the first 5 minutes.

Performance Mode + Highest Level Overclock (If Applicable)	CPU Frequency
Intel Processor i9-8950HK in Overclocked level 3 mode	2900 MHz~5000 MHz
Intel Processor i7-8750H in performance mode	2200 MHz~4100 MHz
Intel Processor i5-8300H in performance mode	2300 MHz~4000 MHz

Note:

The CPU peak temperature should be less than or equal to 100°C (212°F).
When under high stress, the computer's average temperature can be expected to be up to 95°C (203°F).

Monitor the CPU temperature on the Fusion page.

Alienware 15 R4, and 17 R5

Configure the Alienware Command Center.
1. Open the Alienware Command Center.
2. Set the Active System Theme - Thermal as Performance Mode.
3. Change the Active System Theme - Overclock to Overclock 02 (if applicable).

Using the preinstalled Dell SupportAssist software, run the CPU stress test. From Dell SupportAssist, click Hardware Checkup, CPU, and then CPU stress test.

Launch the Alienware Command Center and go to Fusion and monitor the CPU frequency. Ensure that the CPU frequency is within the range during the first 5 minutes.

Performance Mode + Highest Level Overclock (If Applicable)	CPU Frequency
Intel Processor i9-8950HK in Overclocked level 3 mode	2900 MHz~5000 MHz
Intel Processor i7-8750H in performance mode	2200 MHz~4100 MHz
Intel Processor i5-8300H in performance mode	2300 MHz~4000 MHz

Monitor the CPU temperature on the Fusion page.
- The CPU peak temperature should be less than or equal to 100°C (212°F).
- When under high stress, the computer's average temperature can be expected to be up to 95°C (203°F).

Alienware m15, m15 R2, m17, and m17 R2

Configure Alienware Command Center.
1. Open the Alienware Command Center.
2. Set the Active System Theme - Thermal as Performance Mode.

Using the preinstalled Dell SupportAssist software, run the CPU stress test. From Dell SupportAssist, click Hardware Checkup, CPU, and then CPU stress test.

Launch the Alienware Command Center and go to Fusion and monitor the CPU frequency. Ensure that the CPU frequency is within the range during the first 5 minutes under performance mode.

Alienware m15, and m17

CPU Type	Base Frequency	Performance Mode	Cool Mode
Intel Processor i9-8950HK	2900 MHz	3100 MHz ~ 4800 MHz	2900 MHz ~ 4800 MHz
Intel Processor i7-8750H	2200 MHz	2600 MHz ~ 4100 MHz	2200 MHz ~ 4100 MHz
Intel Processor i5-8300H	2300 MHz	2700 MHz ~ 4100 MHz	2300 MHz ~ 4000 MHz

Alienware m15 R2, and m17 R2

CPU Model Name	Base Frequency	Performance mode	Cool mode
Intel Processor i9-9980HK	2400 MHz	3300 MHz~4800 MHz	2600 MHz~4400 MHz
Intel Processor i9-9880H	2300 MHz	3300 MHz~4400 MHz	2600 MHz~4400 MHz
Intel Processor i7-9750H	2600 MHz	3000 MHz~4000 MHz	2600 MHz~4000 MHz
Intel Processor i5-9300H	2400 MHz	3000 MHz~4000 MHz	2600 MHz~4000 MHz

Monitor the CPU temperature on the Fusion page.
- The CPU peak temperature should be less than or equal to 100°C (212°F).
- When under high stress, the computer's average temperature can be expected to be less than 100°C (212°F).

Note: The CPU average temperature can be expected to reach 95°C (203°F) under cool mode for the Alienware m15, m15R2, m17, and m17R2 computers.

Example: Performance mode

Example: Cool mode

Alienware m15 R3 and m17 R3

Note: Reference this article only after the computer has been diagnosed with the onboard diagnostics (ePSA).

CPU Performance Behavior on the Alienware m15 R3 and m17 R3

In general, the CPU frequency goes higher than Intel CPU's high frequency under Performance mode and Balance mode.

CPU Model Name	i5-10300H	i7-10750H	i9-10980HK
# of Cores	4	6	8
# of Threads	8	12	16
Processor Base Frequency	2.5 GHz	2.6 GHz	2.4 GHz

Fan control modes

Full speed mode: The fan runs full speed to support the CPU operating at turbo frequency for a longer time. A noticeable fan sound can be heard.
Performance mode: The fan runs aggressively to support the CPU operating at turbo frequency for a longer time. A noticeable fan sound can be heard.
Balance mode: The fan runs in a moderate manner. Fan sound is less noticeable, but the period for the CPU to operate at turbo frequency would be shorter.
Cool mode: The fan runs in a moderate manner. Fan sound is less noticeable, but the GPU and GPU performance is limited for better comfort and battery life.
Quiet mode: The fan runs in a more quiet level than Balance Mode. Fan sound is less noticeable, but the period for the CPU to operate at turbo frequency would be lower and shorter.

Note: Regardless of what mode, the CPU temperature can go above 99°C (210.2°F) and trigger a Thermal Event (TCC) under heavy load. TCC is activated and adjusts the CPU Power Limit 1 (PL1) frequency down by a couple hundred MHz. This decrease to the temperature rise allows the computer’s thermal control mechanism to catch up to the computer's best thermal performance balance. This is a general design of all gaming laptops.

Verification Process

First verify using the ePSA diagnostics that the computer has an overheating issue.
Set the test environment and plug the AC adapter to the test unit.
Open the Alienware Command Center (AWCC).
Select the HOME Page on the Alienware Command Center main page.
Set the thermal mode to Performance.
Using the preinstalled Dell SupportAssist software, run the CPU stress test.
Select the FUSION Page and monitor if the CPU Frequency and CPU temperature of Performance Mode CPU perform within the specifications of the below performance table.

Processor	Running Alienware SupportAssist CPU Stress Test
CML i9-10980HK in Performance mode	3900 MHz~4800 MHz
CML i7-10750H in Performance mode	3700 MHz~4600 MHz
CML i5-10300H in Performance mode	3700 MHz~4300 MHz

Note:

The Alienware SupportAssist CPU Stress Test field above relates to only the CPU portion of the stress test, not the memory portion.
The CPU speed should remain close to the listed speed in the first 5 minutes of the stress period.

Select the HOME page.
Change the Thermal Mode to Cool.
Using the preinstalled Dell SupportAssist software, run the CPU stress test.
Select the FUSION page.
Monitor the CPU Frequency and CPU temperature of Cool Mode.
Verify that the CPU performs as specified in the performance table.

Processor	Running Alienware SupportAssist CPU Stress Test
CML i9-10980HK in Performance mode	3000 MHz~4800 MHz
CML i7-10750H in Performance mode	3000 MHz~4600 MHz
CML i5-10300H in Performance mode	3300 MHz~4300 MHz

Note:

The Alienware SupportAssist CPU Stress Test field above relates to only the CPU portion of the stress test, not the memory portion.
The CPU speed should remain close to the listed speed in the first 5 minutes of the stress period.

Reference Settings:

Open the Alienware Command Center to set performance mode on the Home Page.

Stress the CPU using Dell SupportAssist. From Dell SupportAssist, click checkup, choose CPU, and then run the stress test.

Monitor the CPU frequency and temperature on the FUSION page.

Example: Performance Mode

Example: Cool Mode

Note: Third-party tools may show the temperature in red when the CPU T is greater than 90°C (194°F). However, being red does not indicate that there is an issue. When the Thermal Control Circuit (TCC) is activated at 100°C (212°F), it adjusts the CPU Power Limit 1 (PL1) frequency down by a couple hundred MHz. This decrease to the temperature rise allows the computer’s thermal control mechanism to catch up to the computer's best thermal performance balance. This is a general design of all gaming laptops.

Common Questions

Why does the computer Diagnostic Tool post High CPU temperatures in idle mode?
When the computer is idle, the computer is not truly idle. There are background tasks operating in high frequency still, and they induce short period high CPU temperatures (less than 1 second). Then they lower down to a lower average temperature.

Does the CPU get damaged when CPU temperatures reach 100°C (212°F)?
No. The CPU operates well under the Intel CPU specification: Tjmax=100. (Intel) Processors supply a method (Digital Thermal Sensor or DTS) to report real time die temperatures below, equal to, or above the Tj(max). While the die should not typically run above the Tj (max), a temperature value above the Tj(max) may occur occasionally under normal operation. (Tj(max)=100)

Why does the Diagnostic Tool post High CPU temperatures in a gaming application or a graphic stress application?
Some gaming and graphic stress applications that are combined with heavy CPU activity causes high CPU temperatures.

Is the CPU peak temperature under balance mode lower than under performance mode?
No. Under Balance Mode, the CPU can still boost to its highest frequency in short periods and induce high peak temperatures. The CPU high peak temperature is expected when you set it to grab the best performance, no matter whether performance mode, balanced mode, quiet mode, or cool mode is chosen.

Alienware Area-51m and Area-51m R2

Note: Reference this article only after the computer has been diagnosed with the onboard diagnostics (ePSA).

CPU Performance Behavior on the Alienware Area-51m and Area-51m R2

In general, the CPU frequency remains higher than the Intel CPU's base frequency.

Alienware Area 51M

CPU Model Name	i7-8700	i9-9700K	i9-9900K
Number of Cores	6	8	8
Number of Threads	12	8	16
Processor Base Frequency	3.2 GHz	3.6 GHz	3.6 GHz

Alienware Area 51M R2

CPU Model Name	i7-10700	i7-10700K	i7-10900	i9-10900K
Number of Cores	8	8	10	10
Number of Threads	16	16	20	20
Processor Base Frequency	2.9 GHz	3.8 GHz	2.8 GHz	3.7 GHz

Five fan control modes

Performance mode: The fan runs aggressively to support the CPU operating at turbo frequency for a longer time. A noticeable fan sound can be heard.
Balance mode: The fan runs in a moderate manner. Fan sound is less noticeable, but the period for the CPU to operate at turbo frequency would be shorter.
Cool mode: The fan runs in a moderate manner. Fan sound is less noticeable, but the GPU and GPU performance is limited for better comfort and battery life.
Quiet mode: The fan runs in a quieter level than Balance Mode. Fan sound is less noticeable, but the period for the CPU to operate at turbo frequency would be lower and shorter.
Full speed mode: The fan runs full speed to support the CPU operating at turbo frequency for a longer time. A noticeable fan sound can be heard.

Note: Regardless of what mode, the CPU temperature can go above 90°C (194°F) under heavy load. Intel Processors supply a method (Digital Thermal Sensor or DTS) to report real-time die temperature that is below, equal to, or above Tj(max). While the die should not run above Tj (max), a temperature value above Tj(max) may occur occasionally under normal operation. (Tj(max)=100)

Verification Process

First verify using ePSA that the computer has an overheating issue.
Set the test environment and plug an AC adapter to the test unit.
Open the Alienware Command Center (AWCC).
Select the HOME Page on the AWCC Main Page.
Set the Thermal Mode to Performance.
Using the preinstalled Dell SupportAssist software, run the CPU stress test. From Dell SupportAssist, click Troubleshooting, I want to troubleshoot my PC, I want to check a specific piece of hardware, and then click CPU.

From the hardware scan prompt, click CPU stress test, and then click Run Test.

Select the FUSION Page.
Monitor the CPU Frequency and CPU temperature of Performance Mode.
Verify that the CPU average temperature stays high and keeps the operating frequency higher than the CPU Base Frequency + 400 MHz.
Select the HOME Page.
Change the Thermal Mode to Cool.
Stress test the CPU again using the Dell SupportAssist CPU stress test.
Select the FUSION Page.
Monitor the CPU Frequency and CPU temperature of Cool Mode.

Reference Settings:

Open the Alienware Command Center to set the performance mode from the HOME Page.
Set the Active System thermal mode to Performance Mode.

Using Dell SupportAssist, run the stress test.

Read the temperature on the FUSION Window.
The CPU temperature should be no greater than 100°C (212°F) using Performance Mode.

The CPU average temperature should be no greater than 99°C (210.2°F) using Cool Mode.

Note: Third-party tools may show the temperature in red when the CPU T is greater than 90°C (194°F). However, being red does not indicate that there is an issue. When the Thermal Control Circuit (TCC) is activated at 100°C (212°F), it adjusts the CPU Power Limit 1 (PL1) frequency down by a couple hundred MHz. This decrease to the temperature rise allows the computer’s thermal control mechanism to catch up to the computer's best thermal performance balance. This is a general design of all gaming laptops.

Common Questions

Why does the Diagnostic Tool post High CPU temperatures in idle mode?
When the computer is idle, the computer is not truly idle. There are still background tasks still operating in high frequency and they induce short period high CPU temperatures (less than 1 second). Then they lower down to a lower average temperature.

Does the CPU get damaged when CPU temperatures reach 100°C (212°F)?
No. The CPU operates well under the Intel CPU specification: Tjmax=100. Intel processors supply a method (Digital Thermal Sensor, or DTS) to report real time die temperatures below, equal to, or above the Tj(max). While the die should not typically run above the Tj (max), a temperature value above the Tj(max) may occur occasionally under normal operation. (Tj(max)=100)

Why does the Diagnostic Tool post High CPU temperatures in a gaming application or a graphic stress application?
Some gaming or graphic stress applications that are combined with heavy CPU activity causes high CPU temperatures.

Is the CPU peak temperature under balance mode lower than under performance mode?
No. Under Balance Mode, the CPU can still boost to its highest frequency in short periods and induce high peak temperatures. The CPU high peak temperature is expected when you set it to grab the best performance, no matter whether performance mode, balanced mode, quiet mode, or cool mode is chosen.

The Intel eighth generation (Coffee Lake) processor supports a higher clock rate than seventh generation (Kaby Lake) or older processors. That means these computers noticeably generate more heat compared to any previous generation of computers. Because of this, Dell's engineering teams have designed the computer to tolerate higher temperatures.

If the Alienware Command Center reports a CPU peak temperature above 100°C (212°F), contact technical support for a high temperature resolution. You can get contact details from the link below:

Contact Us

Note: These computers are designed to maintain stability when the CPU temperature reaches a set temperature (termed the Thermal Control Circuit activation point). The Thermal Control Circuit (TCC) is activated and adjusts the CPU frequency down by a couple of hundred MHz to reduce the temperature rise. This allows the computer’s thermal control mechanism to catch up. The frequency never drops below the Base Frequency Mode. This slight drop in frequency can sometimes be mistaken for a performance drop. It is a design feature that is common to all gaming laptops. It helps to optimize the performance and prevent computers from exceeding 100°C (212°F). The TCC point for the following computers is:

Alienware 13 R3, 15 R3/R4, and 17 R4/R5 - TCC = 97°C (206.6°F)
Alienware M15, and M17 - TCC = 100°C (212°F)
Alienware Area-51m R2 - TCC = 100°C (212°F)

If none of the information above has affected or been responsible for your issue, there is another setting to check. The mode set in your Thermal User Profile can also affect the fan noise and the computer thermal temperature. Reference the mode types below and confirm that you have the mode enabled that works for you.

All Models:

Performance Mode: The fan runs aggressively to support the CPU operating at Turbo frequency for longer periods. The fan is noticeably heard to run.
Balance Mode: The fan runs at a more moderate rate, which allows the CPU to operate at Turbo frequency for shorter periods. The fan is still heard but is quieter.
Cool Mode: The fan runs slower and the fan is quieter, but the GPU and its performance are also limited to increase battery life.
Quiet Mode: The fan runs slower than in balance mode and the fan noise is less noticeable than in cool mode, but the GPU performance is limited. The time that the CPU can operate at Turbo frequency would be lower and shorter.

Alienware m15 R3, m17 R3, and Area-51m R2:

Full speed mode: The fan runs full speed to support the CPU operating at turbo frequency for a longer time. A noticeable fan sound is heard.

Resolving High CPU Temperature Issues on Alienware Laptops

Zhrnutie: Discover solutions for high CPU temperatures on Alienware laptops. Learn how to run updates, troubleshoot, and optimize thermal controls.

Symptómy

Affected Platforms:

High CPU temperatures on Alienware laptops

Príčina

How to Troubleshoot High CPU Temperatures

Alienware 13 R3, 15 R3, and 17 R4

Alienware 15 R4, and 17 R5

Alienware m15, m15 R2, m17, and m17 R2

Alienware m15, and m17

Alienware m15 R2, and m17 R2

Alienware m15 R3 and m17 R3

Reference Settings:

Alienware Area-51m and Area-51m R2

Alienware Area 51M

Alienware Area 51M R2

Riešenie

Ďalšie informácie

Recommended Articles

Dotknuté produkty

Vlastnosti článku

Nájdite odpovede na svoje otázky od ostatných používateľov spoločnosti Dell

Služby podpory

Vlastnosti článku

Nájdite odpovede na svoje otázky od ostatných používateľov spoločnosti Dell

Služby podpory

Vitajte

Vitajte v spoločnosti Dell!

Resolving High CPU Temperature Issues on Alienware Laptops

Zhrnutie: Discover solutions for high CPU temperatures on Alienware laptops. Learn how to run updates, troubleshoot, and optimize thermal controls.

Podrobný článok

Symptómy

Príčina

Riešenie

Ďalšie informácie

Dotknuté produkty

Symptómy

Affected Platforms:

High CPU temperatures on Alienware laptops

Príčina

How to Troubleshoot High CPU Temperatures

Alienware 13 R3, 15 R3, and 17 R4

Alienware 15 R4, and 17 R5

Alienware m15, m15 R2, m17, and m17 R2

Alienware m15, and m17

Alienware m15 R2, and m17 R2

Alienware m15 R3 and m17 R3

Reference Settings:

Alienware Area-51m and Area-51m R2

Alienware Area 51M

Alienware Area 51M R2

Riešenie

Ďalšie informácie

Recommended Articles

Dotknuté produkty

Vlastnosti článku

Nájdite odpovede na svoje otázky od ostatných používateľov spoločnosti Dell

Služby podpory

Vlastnosti článku

Nájdite odpovede na svoje otázky od ostatných používateľov spoločnosti Dell

Služby podpory