Перейти к основному содержимому
  • Простое и быстрое размещение заказов
  • Просмотр заказов и отслеживание состояния доставки
  • Создание списка продуктов и доступ к нему

How To Load The Intel Rapid Storage Technology Driver To Install An Operating System On An NVMe Storage Drive

Сводка: This article describes how to load the Intel Rapid Storage Technology (IRST) driver (version 17.5 or newer). IRST is required to install the Operating System on a Non-Volatile Memory express (NVMe) storage drive. ...

Данная статья применяется к   Данная статья не применяется к 

Инструкции

Steps to load Intel Rapid Storage Technology driver to install operating system on NVMe memory

  1. Go to the Dell Drivers & Downloads web page and identify your computer:

    1. The IRST driver is located under the Storage or Serial ATA categories. Download the x64 version of the IRST driver (version 17.5 or newer) to a computer.

    2. Double-click the .exe file that you have saved to a computer.

    3. Do Not select Install, choose Extract instead.

    4. Direct the extract tool to extract the driver files to an empty bootable USB Key.

  2. Connect the Operating System Reinstallation Image (OSRI) bootable USB Key to the computer and initiate the operating system deployment by booting from the USB Key.

  3. On the Windows Setup page where the storage drives are listed, select Load Driver. (See Figure.1)

    Select where to install Windows screen

    (Figure.1 Windows setup screen)

  4. Insert the second USB drive (The drive with the IRST driver files) into another USB port, if one is available. (If another USB port is not available, remove the OSRI USB drive and insert the second USB drive into the same USB port.)

  5. In the Load Driver window, click Browse. (See Figure.2)

    How to Browse for the correct Driver screen

    (Figure.2 Load driver screen)

  6. In the Browse for Folder window, browse the USB drive and select the folder where the IRST driver files are available. Then click OK. (See Figure.3)

    Selecting the Folder to locate the Windows files screen

    (Figure.3 Browse for folder screen)

  7. In the Windows Setup window, the available driver files are listed out (iaStorAC.inf). Click Next to install the listed driver. (See Figure.4)

    Identifying and selecting the Driver screen

    (Figure.4 Windows setup screen)

  8. Once the driver is installed, NVMe storage appears in the drive list and you can continue the operating system deployment. (See Figure.5)

    Driver installation success and correct installation path confirmation screen

    (Figure.5 Windows setup screen)

    In the above screenshot, we can find the Drive 2 detection which is not there in the first screenshot.

Further instructions are available to complete this installation. Select the correct operating system from those listed on the following Dell Portal Page:

Дополнительная информация

Свойства статьи
Номер статьи: 000132969
Тип статьи: How To
Последнее изменение: 27 May 2024
Версия:  10
Получите ответы на свои вопросы от других пользователей Dell
Услуги технической поддержки
Проверьте, распространяются ли на ваше устройство услуги технической поддержки.
Свойства статьи
Номер статьи: 000132969
Тип статьи: How To
Последнее изменение: 27 May 2024
Версия:  10
Получите ответы на свои вопросы от других пользователей Dell
Услуги технической поддержки
Проверьте, распространяются ли на ваше устройство услуги технической поддержки.