Перейти к основному содержимому
Выход

Добро пожаловать в Dell

Моя учетная запись
  • Простое и быстрое размещение заказов
  • Просмотр заказов и отслеживание состояния доставки
  • Создание списка продуктов и доступ к нему
Вход Создать учетную запись Вход на портал Premier Вход в партнерскую программу

How to Enable Debug Logging for Dell Endpoint Security Suite Enterprise Web Control and Client Firewall

Сводка: Debug logging for Dell Endpoint Security Suite Enterprise Web Control and Client Firewall can be enabled using these instructions.

Данная статья применяется к Данная статья не применяется к Эта статья не привязана к какому-либо конкретному продукту. В этой статье указаны не все версии продуктов.
Ознакомьтесь с другими ресурсами

Симптомы

Note:
  • As of May 2022, Dell Endpoint Security Suite Enterprise has reached End of Maintenance. This product and its articles are no longer updated by Dell.
  • As of January 2019, Dell Endpoint Security Suite Pro has reached End of Maintenance. This product and its articles are no longer updated by Dell.
  • For more information, reference Product Life Cycle (End of Support and End of Life) Policy for Dell Data Security. If you have any questions on alternative articles, either reach out to your sales team or contact endpointsecurity@dell.com.
  • Reference Endpoint Security for additional information about current products.

This article discusses how to enable debug logging to troubleshoot Dell Endpoint Security Enterprise Web Control and Client Firewall features.

Affected Products:

  • Dell Endpoint Security Suite Enterprise
  • Dell Endpoint Security Suite Pro

Причина

Not applicable

Разрешение

To assist Dell in more quickly identifying the issue, Dell Technologies recommends that you enable verbosity (debug logging) and then reproduce the issue before collecting logs.

Warning: Verbosity should only be enabled to troubleshoot an issue. Dell Technologies recommends disabling verbosity after the issue is resolved. Endpoints may experience performance degradation while verbosity is enabled.
  1. From a web browser, go to the Dell Data Security administration console at https://servername.company.com:8443/webui.
Note:
  • The example servername.company.com may differ from the server DNS in your environment.
  • The port, 8443, may differ from the Remote Management Console port in your environment.
  1. Sign in to the Dell Data Security administration console.

Dell Data Security administration console

  1. In the left menu, expand Populations and then click Endpoints.

Endpoints

  1. Click the affected Hostname.

Select a hostname

Note: The Hostname examples will differ in your environment.
  1. Under Threat Prevention, click Protection Settings.

Protection Settings

  1. Check Debug Logging for Web Protection and Debug Logging for Client Firewall.

Debug Logging for Web Protection and Debug Logging for Client Firewall

  1. In the upper right corner, click Save.

Save

  1. Commit the policy change.
Note:
  1. Reproduce the issue on the affected Hostname (Step 4).

To contact support, reference Dell Data Security International Support Phone Numbers.
Go to TechDirect to generate a technical support request online.
For additional insights and resources, join the Dell Security Community Forum.

Затронутые продукты

Dell Endpoint Security Suite Pro, Dell Endpoint Security Suite Enterprise
Свойства статьи
Номер статьи: 000130129
Тип статьи: Solution
Последнее изменение: 03 Nov 2023
Версия:  10
Получите ответы на свои вопросы от других пользователей Dell
Услуги технической поддержки
Проверьте, распространяются ли на ваше устройство услуги технической поддержки.