OptiPlex 3050 Support for PCIe M.2 SSD Hard Drives
Summary: This article provides information about the OptiPlex 3050 support for M.2 SSD PCIe hard drives.
Acest articol se aplică pentru
Acest articol nu se aplică pentru
Acest articol nu este legat de un produs specific.
Acest articol nu acoperă toate versiunile de produs existente.
Symptoms
The M.2 slot on the OptiPlex 3050 supports only PCIe M.2 SSD hard drives. This article provides additional information about this issue to ensure that the correct M.2 SSD hard drive is installed.
Cause
No cause information
Resolution
The drive must use the PCIe bus instead of SATA when installing an M.2 SSD hard drive in the OptiPlex 3050. The following image (Figure 1) provides a visual reference for the two formats:
Figure 1: M.2 SSD hard drives
The table below provides additional information about the slots available on the OptiPlex 3050, and support considerations for each configuration (Figure 2):
Figure 2: OptiPlex 3050 slot configuration
Figure 1: M.2 SSD hard drives
The table below provides additional information about the slots available on the OptiPlex 3050, and support considerations for each configuration (Figure 2):
Figure 2: OptiPlex 3050 slot configuration
Additional Information
Recommended Articles
Here are some recommended articles related to this topic that might be of interest to you.
Produse afectate
OptiPlex 3050 Tower, OptiPlex 3050 Micro, OptiPlex 3050 Small Form FactorProprietăți articol
Article Number: 000129720
Article Type: Solution
Ultima modificare: 27 iul. 2024
Version: 9
Găsiți răspunsuri la întrebările dvs. de la alți utilizatori Dell
Servicii de asistență
Verificați dacă dispozitivul dvs. este acoperit de serviciile de asistență.