Dell S2722DC and S2722QC Monitors Cannot Update Firmware Using Computers with ARM Processors

Summary: Information about older revisions of the Dell S2722DC and S2722QC monitors not being able to update firmware from computers with ARM processors.

Acest articol se aplică pentru Acest articol nu se aplică pentru Acest articol nu este legat de un produs specific. Acest articol nu acoperă toate versiunile de produs existente.
Consultați alte resurse

Symptoms

Older revision Dell S2722DC and S2722QC monitors cannot update their firmware using a computer with an ARM processor. Newer Dell S2722DC and S2722QC monitors do not need any firmware update.

Cause

The firmware for the Dell S2722DC and S2722QC monitors only supports Windows 10 and 11.

Resolution

Windows 10 and 11 Computer

To update the firmware on Dell S2722DC and S2722QC monitors (older revision, End of Life version), you must use a Windows 10 or 11 computer. No firmware update is required for currently shipping revisions of these monitors.

Back to Top

Note: Newer revision monitors have firmware version M3B201 and do not need a firmware update. If you have firmware version M3B102, you must install the latest version of the firmware.

Produse afectate

Dell S2722QC, Dell S2722DC
Proprietăți articol
Article Number: 000256204
Article Type: Solution
Ultima modificare: 22 May 2026
Version:  3
Găsiți răspunsuri la întrebările dvs. de la alți utilizatori Dell
Servicii de asistență
Verificați dacă dispozitivul dvs. este acoperit de serviciile de asistență.