TPM Option Is Missing in the System BIOS Setup Latitude, Precision, or XPS

You may encounter a situation where the Trusted Platform Module (TPM) 2.0 option is missing from the BIOS setup screen, the Security option, or that there is no TPM present when running the Trusted Platform Module Microsoft management console (TPM.msc) in Windows.

This issue may become apparent as the result of a BitLocker recovery message.

On computers with encrypted hard drives installed, you may also experience a no-boot situation if the TPM option is missing. Check the BIOS settings to ensure that TPM is not missing. Also, follow the steps below to resolve the missing TPM issue if a no-boot occurs on an encrypted hard drive.

No cause information.

If you are using UEFI boot mode, it is recommended to download and install the latest TPM 2.0 firmware version from the Dell Support Website on your applicable systems. The firmware is located under the Security category in the list of drivers. This new TPM 2.0 firmware should prevent this issue from occurring in the future.

If using Legacy boot mode, download and install the latest TPM 1.2 firmware version from the Dell Drivers & Download website on your applicable systems. The firmware is located under the Security category in the list of drivers.

If TPM is not present, try the following troubleshooting steps:

1. Update the system BIOS to the latest version available on the Dell Drivers & Downloads website.
2. Power off the computer, then disconnect the AC power cable and leave the computer unplugged for about 30 seconds.
3. Reconnect AC power to the computer and boot to the BIOS setup using the F12 one-time boot menu.
   NOTE: To ensure TPM is turned on, you must press F2 to enter System Setup. Then go to the Security section and check that TPM is set to On under the TPM security settings.
4. If TPM is restored, continue with normal system operation.
5. If TPM is still missing from the BIOS setup, contact Dell Technical Support for further assistance.

Recommended Articles

Here are some recommended articles related to this topic that might be of interest to you.

• How to Troubleshoot and Resolve Common Issues with Trusted Platform Module (TPM) and BitLocker
• Dell computers that can upgrade from TPM version 1.2 to 2.0
• How to enable the TPM (Trusted Platform Module)
• Trusted Platform Module (TPM) Frequently Asked Questions for Windows 11
• Resolving a TPM Error Seen During BitLocker Encryption on a Dell PC
• How to Configure the Trusted Platform Module (TPM) When It's Greyed Out in BIOS on a Latitude 7350
• Cannot Enable Trusted Platform Module (TPM) as option is greyed out in BIOS
• How to update the TPM firmware when you get the error message "The update image is not for this system"
• Activating the Trusted Platform Module Security Feature
• How to Successfully Update the TPM Firmware on your Dell Computer
• Using scripting or automation for TPM firmware updates from Dell
• Updating the BIOS on Dell Systems With BitLocker Enabled