How to Install Dell Encryption Enterprise or Personal Self-Encrypting Drive Manager
Podsumowanie: Dell Encryption Enterprise Self-Encrypting Drive Manager (formerly Dell Data Protection | Self-Encrypting Drive Manager) and Dell Encryption Personal Self-Encrypting Drive Manager can be installed using these instructions for either the user interface (UI) or the command line (CLI). ...
Ten artykuł dotyczy
Ten artykuł nie dotyczy
Ten artykuł nie jest powiązany z żadnym konkretnym produktem.
Nie wszystkie wersje produktu zostały zidentyfikowane w tym artykule.
Objawy
This article provides the steps for installing Dell Encryption Enterprise Self-Encrypting Drive Manager (formerly Dell Data Protection | Self-Encrypting Drive Manager) or Dell Encryption Personal Self-Encrypting Drive Manager.
Affected Products:
- Dell Encryption Enterprise Self-Encrypting Drive Manager
- Dell Encryption Personal Self-Encrypting Drive Manager
- Dell Data Protection | Self-Encrypting Drive Manager
Affected Versions:
- v8.0.0 and Later
Affected Operating Systems:
- Windows
Przyczyna
Not applicable
Rozwiązanie
Note: Before installation:
- System requirements must be validated. For more information, reference:
- Dell Encryption Enterprise Self-Encrypting Drive Manager must be downloaded and extracted from the Master Installer.
- For more information about the download process, reference How to Download Dell Encryption Enterprise or Dell Encryption Personal.
- For information about extraction process, reference How to Extract Child Installers from the Dell Data Security Master Installer.
Dell Encryption Enterprise / Personal Self-Encrypting Drive Manager can be installed through the:
Click the preferred method for more information.
UI
Click the appropriate client version for specific installation steps. For more information, reference How to Identify the Dell Encryption Enterprise and Personal Self-Encrypting Drive Manager Version.
- Double-click EMAgent_64bit_setup.exe.
- Select the language and then click OK.
- If any missing requirements are detected, click Install. Otherwise, go to Step 4.
- Click Next to proceed.
- Accept the terms of the license agreement and then click Next.
- Optionally, Change the installation location and then click Next.
- Select one of the following:
- Encryption Personal, click Next, and then go to Step 9.
- On-Prem Dell Managed Server, click Next, and then go to Step 8.
- From the Enterprise Server menu:
- Populate the Enterprise Server Host name.
- Optionally, change Enterprise Server Port number.
- Populate the Security Server Host name.
- Optionally, change Security Server Port number.
- Click Next.
Note:
- The example, server.domain.com, will differ from the server fully qualified domain name (FQDN) in your environment.
- By default:
- 8888 is used for policy changes.
- 8443 is used for preboot authentication connections.
- The default ports may differ from the port in your environment.
- Click Install.
- Upon installation, click Finish to close the UI.
- Click Yes to reboot the machine.
- Double-click EMAgent_64bit_setup.exe.
- Select the language and then click OK.
- If any missing requirements are detected, click Install. Otherwise, go to Step 4.
- Click Next to proceed.
- Accept the terms of the license agreement and then click Next.
- Optionally, Change the installation location and then click Next.
- Select one of the following:
- Encryption Personal, click Next, and then go to Step 9.
- On-Prem Dell Managed Server, click Next, and then go to Step 8.
- From the Enterprise Server menu:
- Populate the Enterprise Server Host name.
- Optionally, change Enterprise Server Port number.
- Populate the Security Server Host name.
- Optionally, change Security Server Port number.
- Click Next.
Note:
- The example, server.domain.com, will differ from the server fully qualified domain name (FQDN) in your environment.
- By default:
- 8888 is used for policy changes.
- 8443 is used for preboot authentication connections.
- The default ports may differ from the port in your environment.
- Click Install.
- Upon installation, click Finish to close the UI.
- Click Yes to reboot the machine.
- Double-click EMAgent_64bit_setup.exe.
- Select the language and then click OK.
- If any missing requirements are detected, click Install. Otherwise, go to Step 4.
- Click Next to proceed.
- Accept the terms of the license agreement and then click Next.
- Optionally, Change the installation location and then click Next.
- Select one of the following:
- Locally Managed, click Next, and then go to Step 9.
- Managed by Dell Server, click Next, and then go to Step 8.
- From the Enterprise Server menu:
- Populate the Enterprise Server Host name.
- Optionally, change Enterprise Server Port number.
- Populate the Security Server Host name.
- Optionally, change Security Server Port number.
- Click Next.
Note:
- The example, server.domain.com, will differ from the server fully qualified domain name (FQDN) in your environment.
- By default:
- 8888 is used for policy changes.
- 8443 is used for preboot authentication connections.
- The default ports may differ from the port in your environment.
- Click Install.
- Upon installation, click Finish to close the UI.
- Click Yes to reboot the machine.
- Double-click EMAgent_64bit_setup.exe.
- Click Next to proceed.
- Accept the terms in the license agreement and then click Next.
- Optionally, Change the installation location and then click Next.
- Select one of the following:
- Locally Managed, click Next, and then go to Step 7.
- Managed by Dell Server, click Next, and then go to Step 6.
- From the Enterprise Server menu:
- Populate the Enterprise Server Host name.
- Optionally, change Enterprise Server Port number.
- Populate the Security Server Host name.
- Optionally, change Security Server Port number.
- Click Next.
Note:
- The example, server.domain.com, will differ from the server fully qualified domain name (FQDN) in your environment.
- By default:
- 8888 is used for policy changes.
- 8443 is used for preboot authentication connections.
- The default ports may differ from the port in your environment.
- Click Install.
- Upon installation, click Finish to close the UI.
- Click Yes to reboot the machine.
- Double-click EMAgent_64bit_setup.exe.
- Click Next to proceed.
- Accept the terms in the license agreement and then click Next.
- Optionally, Change the installation location and then click Next.
- Select one of the following:
- Locally Managed, click Next, and then go to Step 7.
- Managed by Dell Server, click Next, and then go to Step 6.
- From the Enterprise Server menu:
- Populate the Enterprise Server Host name.
- Optionally, change Enterprise Server Port number.
- Populate the Security Server Host name.
- Optionally, change Security Server Port number.
- Click Next.
Note:
- The example, server.domain.com, will differ from the server fully qualified domain name (FQDN) in your environment.
- By default:
- 8888 is used for policy changes.
- 8443 is used for preboot authentication connections.
- The default ports may differ from the port in your environment.
- Click Install.
- Upon installation, click Finish to close the UI.
- Click Yes to reboot the machine.
CLI
Click the appropriate client version for specific install switches. For more information, reference How to Identify the Dell Encryption Enterprise and Personal Self-Encrypting Drive Manager Version.
Dell Encryption Enterprise or Personal Self-Encrypting Drive Manager can be installed in the CLI (command-line interface) through the usage of switches and parameters.
| Switch | Required | |
|---|---|---|
/V |
Yes | Passes variables to the .msi inside the executable. The content must always be enclosed in plain-text quotes. |
/S |
No | Installs the .msi in Silent Mode. |
/L*V |
No | Logging verbose output. The content must always be enclosed in plain-text quotes. |
/Q |
No | No progress dialog. Restarts itself after process completion. |
/QB |
No | Progress dialog with Cancel button. Prompts for restart. |
/QB- |
No | Progress dialog with Cancel button. Restarts itself after process completion. |
/QB! |
No | Progress dialog without Cancel button. Prompts for restart. |
/QB!- |
No | Progress dialog without Cancel button. Restarts itself after process completion. |
/QN |
No | Runs the .msi with no user interface. |
| Parameters | Values | Required | Purpose |
|---|---|---|---|
CM_EDITION= |
0 | Yes | Defines the installation as locally managed. |
| 1 | Defines the installation as remotely managed. | ||
INSTALLDIR= |
See Example Below | No | (Optionally) change the installation directory. The path must start and end with \" if the specified directory includes a space. |
SERVERHOST= |
See Example Below | Yes, if CM_EDITION value is set to 1. |
Fully qualified domain name (FQDN) or static IP of Dell Security Management Server. |
SERVERPORT= |
See Example Below | No | Specifies a nonstandard port. Defaults to 8888 if not specified. |
SECURITYSERVERHOST= |
See Example Below | Yes, if CM_EDITION value is set to 1. |
Fully qualified domain name (FQDN) or static IP of Dell Security Management Server. |
SECURITYSERVERPORT= |
See Example Below | No | Specifies a nonstandard port. Defaults to 8443 if not specified. |
FEATURE= |
SED |
Yes | Marks Self-Encrypting Drive Manager for install. |
BLM,SED |
Marks BitLocker Manager and Self-Encrypting Drive Manager for install. | ||
ARPSYSTEMCOMPONENT= |
0 | No | Shows application in Add or Remove Programs. |
| 1 | Hides application in Add or Remove Programs. |
CLI Installation Examples:
Example #1:
EMAgent_64bit_setup.exe /s /v"CM_EDITION=1 SERVERHOST=FQDN.domain.com SECURITYSERVERHOST=FQDN.domain.com ARPSYSTEMCOMPONENT=1 FEATURE=SED /l*v C:\Dell\SEDInstall.log /qn"
Example #1 contains:
- Installer = EMAgent_64bit_setup.exe
- Remotely managed
- Silent install = Yes
- Feature to install =
SED(Self-Encrypting Drive) - Dell Security Management Server = FQDN.domain.com
- Remove application listing from Add or Remove Programs = Yes
- Reboot post install = No
- Installation Log = C:\Dell\SEDInstall.log
Example #2:
EMAgent_64bit_setup.exe /s /v"CM_EDITION=0 ARPSYSTEMCOMPONENT=0 FEATURE=SED /l*v SEDInstall.log /qn"
Example #2 contains:
- Installer = EMAgent_64bit_setup.exe
- Locally managed
- Silent install = Yes
- Feature to install =
SED(Self-Encrypting Drive) - Remove application listing from Add or Remove Programs = No
- Reboot post install = No
- Installation Log = SEDInstall.log (created in the directory of the installer)
Example #3:
EMAgent_32bit_setup.exe /s /v"CM_EDITION=1 SERVERHOST=FQDN.domain.com SERVERPORT=8888 SECURITYSERVERHOST=FQDN.domain.com SECURITYSERVERPORT=8443 ARPSYSTEMCOMPONENT=1 FEATURE=BLM,SED /l*v C:\Dell\SEDInstall.log /qn"
Example #3 contains:
- Installer = EMAgent_32bit_setup.exe
- Remotely managed
- Silent install = Yes
- Security Management Server = FQDN.domain.com
- Server Port = 8888
- Security Server Port = 8443
- Feature to install =
BLM(BitLocker Manager) andSED(Self-Encrypting Drive) - Remove application listing from Add or Remove Programs = No
- Reboot post install = No
- Installation Log = SEDInstall.log (created in the directory of the installer)
Dell Encryption Enterprise or Personal Self-Encrypting Drive Manager can be installed only in the CLI (command-line interface) through the usage of switches and parameters.
| Switch | Required | |
|---|---|---|
/V |
Yes | Passes variables to the .msi inside the executable. The content must always be enclosed in plain-text quotes. |
/S |
No | Installs the .msi in Silent Mode. |
/L*V |
No | Logging verbose output. The content must always be enclosed in plain-text quotes. |
/Q |
No | No progress dialog. Restarts itself after process completion. |
/QB |
No | Progress dialog with Cancel button. Prompts for restart. |
/QB- |
No | Progress dialog with Cancel button. Restarts itself after process completion. |
/QB! |
No | Progress dialog without Cancel button. Prompts for restart. |
/QB!- |
No | Progress dialog without Cancel button. Restarts itself after process completion. |
/QN |
No | Runs the .msi with no user interface. |
| Parameters | Values | Required | Purpose |
|---|---|---|---|
CM_EDITION= |
0 | Yes | Defines the installation as locally managed. |
| 1 | Defines the installation as remotely managed. | ||
SERVERHOST= |
See Example Below | Yes, if CM_EDITION value is set to 1. |
Fully qualified domain name (FQDN) or static IP of Dell Security Management Server. |
SERVERPORT= |
See Example Below | No | Specifies a nonstandard port. Defaults to 8888 if not specified. |
SECURITYSERVERHOST= |
See Example Below | Yes, if CM_EDITION value is set to 1. |
Fully qualified domain name (FQDN) or static IP of Dell Security Management Server. |
SECURITYSERVERPORT= |
See Example Below | No | Specifies a nonstandard port. Defaults to 8443 if not specified. |
FEATURE= |
SED |
Yes | Marks Self-Encrypting Drive Manager for install. |
BLM,SED |
Marks BitLocker Manager and Self-Encrypting Drive Manager for install. | ||
ARPSYSTEMCOMPONENT= |
0 | No | Shows application in Add or Remove Programs. |
| 1 | Hides application in Add or Remove Programs. |
CLI Installation Examples:
Example #1:
EMAgent_64bit_setup.exe /s /v"CM_EDITION=1 SERVERHOST=FQDN.domain.com SECURITYSERVERHOST=FQDN.domain.com ARPSYSTEMCOMPONENT=1 FEATURE=SED /l*v C:\Dell\SEDInstall.log /qn"
Example #1 contains:
- Installer = EMAgent_64bit_setup.exe
- Remotely managed
- Silent install = Yes
- Feature to install =
SED(Self-Encrypting Drive) - Dell Security Management Server = FQDN.domain.com
- Remove application listing from Add or Remove Programs = Yes
- Reboot post install = No
- Installation Log = C:\Dell\SEDInstall.log
Example #2:
EMAgent_64bit_setup.exe /s /v"CM_EDITION=0 ARPSYSTEMCOMPONENT=0 FEATURE=SED /l*v SEDInstall.log /qn"
Example #2 contains:
- Installer = EMAgent_64bit_setup.exe
- Locally managed
- Silent install = Yes
- Feature to install =
SED(Self-Encrypting Drive) - Remove application listing from Add or Remove Programs = No
- Reboot post install = No
- Installation Log = SEDInstall.log (created in the directory of the installer)
Example #3:
EMAgent_32bit_setup.exe /s /v"CM_EDITION=1 SERVERHOST=FQDN.domain.com SERVERPORT=8888 SECURITYSERVERHOST=FQDN.domain.com SECURITYSERVERPORT=8443 ARPSYSTEMCOMPONENT=1 FEATURE=BLM,SED /l*v C:\Dell\SEDInstall.log /qn"
Example #3 contains:
- Installer = EMAgent_32bit_setup.exe
- Remotely managed
- Silent install = Yes
- Security Management Server = FQDN.domain.com
- Server Port = 8888
- Security Server Port = 8443
- Feature to install =
BLM(BitLocker Manager) andSED(Self-Encrypting Drive) - Remove application listing from Add or Remove Programs = No
- Reboot post install = No
- Installation Log = SEDInstall.log (created in the directory of the installer)
To contact support, reference Dell Data Security International Support Phone Numbers.
Go to TechDirect to generate a technical support request online.
For additional insights and resources, join the Dell Security Community Forum.
Dodatkowe informacje
Filmy
Produkty, których dotyczy problem
Dell EncryptionWłaściwości artykułu
Numer artykułu: 000124902
Typ artykułu: Solution
Ostatnia modyfikacja: 01 maj 2023
Wersja: 11
Znajdź odpowiedzi na swoje pytania u innych użytkowników produktów Dell
Usługi pomocy technicznej
Sprawdź, czy Twoje urządzenie jest objęte usługą pomocy technicznej.