Ga naar hoofdinhoud
Uitloggen

Welkom bij Dell

Mijn account
  • Snel en eenvoudig bestellen
  • Bestellingen en de verzendstatus bekijken
  • Een lijst met producten maken en openen
  • Beheer uw Dell EMC locaties, producten en contactpersonen op productniveau met Company Administration.
Inloggen Een account maken Inloggen bij Premier Aanmelden voor partnerprogramma
Contact

Uw Dell.com-winkelwagentjes

Artikelnummer: 000141660

Latitude 5285 Teardown removal guide for customer replaceable units (CRUs)

Samenvatting: This article covers the only part of the Dell Latitude 5285 tablet that Dell considers it easy for anyone to remove or replace.

Dit artikel is mogelijk automatisch vertaald. Als u feedback hebt over de kwaliteit, laat het ons dan weten via het formulier onderaan deze pagina.

Article content

Symptomen

These guides will take you step by step through the safe removal of what are considered to be the Customer Replaceable Unit (CRU) parts of a Latitude 5285 system. (CRUs are the parts of the system that shouldn't need an engineer to remove or replace.) The guides will also include pictures to reference what's involved.

Table of Contents:

  1. CRU Removal Guide
  2. Removal Instructions

 

Removal Guide

 

If these guides do not cover what you are looking to do, then you will want to reference your System Manual.

Note: The majority of the parts making up the Dell Latitude 5285 Notebook are not intended for you to remove and replace yourself. For systems under warranty Dell recommends that a service engineer replace those parts instead.

The article below provides information on safe practises to take into consideration before working with electrical equipment.


Back to Top

 

Removal Instructions

 

Note: Please click on the title of the section you want to open below, in order to see the contents.
 
|

 

SLN307621_en_US__3ReqTools_E7450_BKeith_01

1 Small Phillip's head screwdriver 2 Plastic Scribe
3 Small Flat head screwdriver    
 
Note: Be aware that using a large Phillips or Flat Head screwdriver may result in damage to the head of the screws. This would make their removal impossible without speciality tools, that aren't available to our onsite engineers.
 

 

  1. Pre-Removal Instructions Before removing the microSD/micro-SIM cover:

    1. During installation or removal of any hardware always ensure all data is backed up properly

    2. Disconnect any telephone, network, or USB cables from the computer

    3. Disconnect the computer and all attached devices from their electrical outlets

  2. Place the tablet carefully on it's screen and slide the microSD/micro-SIM cover to the right. [1]

SLN307621_en_US__55285_micro_BK_01

  1. Lift the cover off the system [2].

SLN307621_en_US__65285_micro_BK_02

  1. Insert the SD card and / or the micro SIM card in the labelled slots [3] and replace the cover.

SLN307621_en_US__75285_micro_BK_03

If you require further assistance, please contact technical Support.
  Contact Us  

Oorzaak

Not Applicable

Oplossing

Not Applicable

Artikeleigenschappen

Getroffen product

Latitude 5285 2-in-1

Datum laatst gepubliceerd

02 okt. 2023

Versie

6

Artikeltype

Solution

Terug naar boven