Artikelnummer: 000121440
Samenvatting van artikel: in dit artikel wordt uitgelegd hoe u MAC-gebaseerde poortbeveiliging kunt configureren op Dell N-serie switches
Opdracht | Parameters |
console>enable | Voer enable privilege exec mode in. |
console#config | De configuratiemodus activeren. |
console(config)#switchport port-security | Schakel algemene poortbeveiliging in op de switch. |
console(config)#interface gi1/0/5 | Voer een specifieke interface in die poortbeveiliging nodig heeft. |
console(config-if-gi1/0/5)#switchport port-security | Schakel poortbeveiliging in op het interfaceniveau. |
Opdracht | Parameters |
console#config | De configuratiemodus activeren. |
console(config)# mac address-table static c2f3.220a.12f4 vlan 1 interface gi1/0/5 | Hiermee wordt het MAC-adres c2f 3.220 a. 12f4 toegevoegd aan de MAC-tabel voor Interface gi1/0/5. |
console(config)#no mac address-table static c2f3.220a.12f4 vlan 1 interface gi1/0/5 | Voeg "no" toe aan het begin van de opdracht om het MAC-adres te verwijderen. |
Opdracht | Parameters |
console#config | De configuratiemodus activeren. |
console(config)#interface gi1/0/5 | Voer een specifieke interface in die poortbeveiliging nodig heeft. |
console(config-if-Gi1/0/5)#switchport port-security maximum 3 | Stelt de maximumlimiet van statische MAC-adressen in op 3. Het bereik is Standaard is 100. |
Opdracht | Parameters |
console#config | De configuratiemodus activeren. |
console(config)#interface gi1/0/5 | Voer een specifieke interface in die poortbeveiliging nodig heeft. |
console(config-if-gi1/0/5)#switchport port-security dynamic 0 | In dit voorbeeld wordt 0 gebruikt, omdat u normaal gesproken wilt dat de poort MAC-adressen niet meer dynamisch leert. Het bereik is Standaard is 100. |
PowerSwitch N2000 Series, PowerSwitch N3000 Series, PowerSwitch N4000 Series
21 feb. 2021
3
How To