Dell PowerEdge: How to backup a Virtual Disk?
요약: The virtual disk will be represented by a partition, and this partition can be saved using backup tools.
이 문서는 다음에 적용됩니다.
이 문서는 다음에 적용되지 않습니다.
이 문서는 특정 제품과 관련이 없습니다.
모든 제품 버전이 이 문서에 나와 있는 것은 아닙니다.
증상
Note: This article is part of the Server Tutorials: "Raid and Disks" available here .
Definitions
It is important to define what is a disk group and a virtual disk.- Disk Group
A set of physical disks that are logically grouped and assigned a RAID level. Every disk group provides the overall capacity required to create one or more virtual disks.
- Virtual Disk
A logical component created to enable hosts to access storage on the storage array. A virtual disk is created from the capacity available on a disk group and appears as one logical component even though it is created from more than one physical disk.
In a PowerEdge Controller (PERC) virtual disk can be created. What are the steps to backup this VD.
Example: 1 Virtual Disk in Raid-5 mode composed by 3 disk of 600GB.
Note: The max size of this VD will be 1200GB under the operating system.
This is not possible to directly backup at the Virtual Disk level. Backup data means to do a backup at the Operating System level. The virtual disk will be represented by a partition, and this partition can be saved using backup tools.
Dell offers many solutions to backup data according to the needs. Backups can be done from file level to bare metal restore level.
In this example, assuming Windows Server is running on the PowerEdge, you can use the Windows Server Backup tool to create an image backup. If there is a need to restore the data, you will be able to restore the full image on the virtual disk.
원인
-
해결
-
해당 제품
PowerEdge문서 속성
문서 번호: 000143314
문서 유형: Solution
마지막 수정 시간: 14 10월 2021
버전: 5
다른 Dell 사용자에게 질문에 대한 답변 찾기
지원 서비스
디바이스에 지원 서비스가 적용되는지 확인하십시오.