PowerEdge: How to Create a Bootable USB Device with Rufus for Updates
요약: Learn how to create a bootable USB with Rufus to update Dell PowerEdge servers. Follow the step-by-step instructions to prepare and create a bootable USB media.
이 문서는 다음에 적용됩니다.
이 문서는 다음에 적용되지 않습니다.
이 문서는 특정 제품과 관련이 없습니다.
모든 제품 버전이 이 문서에 나와 있는 것은 아닙니다.
지침
This article provides information about making a USB device bootable and integrating an update-image (ISO-file). For servers without an optical drive (DVD) or a configured integrated Dell Remote Access Controller (iDRAC) this is an alternative way of updating all server firmware in one single step.
To create a bootable USB device, you can use the freeware tool Rufus
Note: Rufus is not a Dell certified software. Installation and use it at your own risk. We share our best practices with Rufus but do not support issues regarding this program.
- Download the tool
- Create a Smart Bootable ISO using the Dell Repository Manager (DRM).
- Start the tool
- Insert a USB device (Rufus auto-selects the USB device)
- Choose the created or downloaded ISO-file (Rufus selects the appropriate settings)
- Partition Screen = MBR
- File System = FAT32
- Cluster Size = 1024
- Click Start to create the media
- Restart the server and boot from the created device
If the bootable ISO fails to run after being applied to a bootable USB, change the server boot mode to BIOS or UEFI and attempt the procedure again. If the bootable ISO continues to fail, it is recommended to download the ISO file again or try applying the image to a different USB drive.
Rufus Screenshot
Figure 1: Rufus examples
The first figure shows when the freeware is launched. The second figure shows the Bootable ISO file selected. Click "Start" to launch the process.
해당 제품
PowerEdge문서 속성
문서 번호: 000141551
문서 유형: How To
마지막 수정 시간: 26 2월 2025
버전: 9
다른 Dell 사용자에게 질문에 대한 답변 찾기
지원 서비스
디바이스에 지원 서비스가 적용되는지 확인하십시오.