Interposer Card Only Detects One Solid State Drive (SSD)
요약: Some PCIe M.2 Solid State Drives (SSD) fail detection when installed on Multi-SSD interposer cards. This issue has been observed on a Dell Precision Workstation after the interposer card was installed in the system by the system user. ...
이 문서는 다음에 적용됩니다.
이 문서는 다음에 적용되지 않습니다.
증상
Some PCIe M.2 Solid State Drives (SSD) fail detection when installed on Multi-SSD interposer cards. This issue has been observed on a Dell Precision Workstation after the interposer card was installed in the system by the system user. Only a single SSD drive was detected.
원인
This issue is caused by which slot the interposer card is installed in. The Precision Tower 5810, 7810, 7910 systems are equipped with multiple PCIe slots that will accept x16 PCIe form factor cards, however some of these PCIe slots are wired as PCIe x4, not PCIe x16.
If the slot is wired as PCIe x4, then only one SSD on the interposer card will be detected.
If the slot is wired as PCIe x4, then only one SSD on the interposer card will be detected.
해결
Move the interposer card to a true x16 PCIe slot.
Note: PCIe SSD M.2 Interposer cards installed by Dell from the factory are installed in x16 wired PCIe slot.
해당 제품
Precision Rack 7910, Precision Tower 5810, Dell Precision Tower 7810, Precision Tower 7910문서 속성
문서 번호: 000137329
문서 유형: Solution
마지막 수정 시간: 30 9월 2021
버전: 4
다른 Dell 사용자에게 질문에 대한 답변 찾기
지원 서비스
디바이스에 지원 서비스가 적용되는지 확인하십시오.