문서 번호: 000136465
PowerEdge Server: How to delete a virtual disk using the System Setup
요약: This article introduces about deleting a virtual disk from the device settings menu on System Setup.
문서 콘텐츠
증상
Article Summary
This article provides information on how to delete a virtual disk using the Device Settings menu on the PowerEdge server.
If your PowerEdge server is running the UEFI mode as a boot mode, the RAID BIOS will not be displayed.
Delete a Virtual Disk
-
Press F2 key during the POST to open the System Setup menu.
Or F10 key to open the Lifecycle Controller menu and select System Setup → Advanced Hardware Configuration.
-
On the System Setup Main Menu screen, click Device Settings.
-
On the Device Settings screen, click the target RAID controller.
For the 14th generation system, select Main Menu on the Dashboard View after selecting the controller.
-
On the Main Menu screen, click Virtual Disk Management.
-
On the Virtual Disk Management screen, click the virtual disk to be deleted.
-
Select Delete Virtual Disk from the Operation pull-down menu and click Go.
-
Read the warning displayed, select Confirm and click Yes.
-
Once the "The Operation has been performed successfully" message is displayed click OK.
-
On the Virtual Disk Management screen, ensure the deleted virtual disk is not listed.
원인
-
해결
-
문서 속성
영향을 받는 제품
Servers, PowerEdge
마지막 게시 날짜
27 9월 2021
버전
4
문서 유형
Solution