PowerEdge: How to delete a virtual disk using the System Setup
요약: This article provides information about how to delete a virtual disk using the Device Settings menu on a PowerEdge server. If your PowerEdge server is running the UEFI mode as a boot mode, the RAID BIOS is not displayed. ...
지침
Delete a Virtual Disk.
-
Press the F2 key during the POST to open the System Setup menu.
Or the F10 key to open the Lifecycle Controller menu and select System Setup → Advanced Hardware Configuration.
-
On the System Setup Main Menu screen, click Device Settings.
-
On the Device Settings screen, click the target RAID controller.
For the 14th generation system, select Main Menu on the Dashboard View after selecting the controller.
-
On the Main Menu screen, click Virtual Disk Management.
-
On the Virtual Disk Management screen, click the virtual disk to be deleted.
-
Select Delete Virtual Disk from the Operation drop-down menu and click Go.
-
Read the warning displayed, select Confirm and click Yes.
-
Once the "The Operation has been performed successfully" message is displayed click OK.
-
On the Virtual Disk Management screen, ensure that the deleted virtual disk is not listed.