PowerEdge: How to Delete a Virtual Disk Using the System Setup
요약:
This article provides information about how to delete a virtual disk using the Device Settings menu on a PowerEdge server. If your PowerEdge server is running the UEFI mode as a boot
mode, the RAID BIOS is not displayed.
...
문서 관련성을 확인할 제품을 선택하십시오.
이 문서는 다음에 적용됩니다. 이 문서는 다음에 적용되지 않습니다.이 문서는 특정 제품과 관련이 없습니다.모든 제품 버전이 이 문서에 나와 있는 것은 아닙니다.
Press the F2 key during the POST to open the System Setup menu. Or the F10 key to open the Lifecycle Controller menu and select System Setup → Advanced Hardware Configuration.
On the System Setup Main Menu screen, click Device Settings.
On the Device Settings screen, click the target RAID controller. For the 14th generation system, select Main Menu on the Dashboard View after selecting the controller.
On the Main Menu screen, click Virtual Disk Management.
On the Virtual Disk Management screen, click the virtual disk to be deleted.
Select Delete Virtual Disk from the Operation drop-down menu and click Go.
Read the warning displayed, select Confirm, and click Yes.
Once the "The Operation has been performed successfully" message is displayed, click OK.
On the Virtual Disk Management screen, ensure that the deleted virtual disk is not listed.