Precision 5810 or 3620 Thunderbolt Card Installed in PCIe Slot 1
요약: If the Thunderbolt 2.0 PCIe expansion controller card is installed in the incorrect slot on the motherboard for the Precision T5810 or T3620, the card does not recognize or function properly. This article provides additional information about this issue and guidance on proper installation for the Thunderbolt 2.0 card. ...
이 문서는 다음에 적용됩니다.
이 문서는 다음에 적용되지 않습니다.
이 문서는 특정 제품과 관련이 없습니다.
모든 제품 버전이 이 문서에 나와 있는 것은 아닙니다.
증상
Thunderbolt 2.0 card installed in PCIe slot 1
A Precision Tower 5810 user reported that when they received their system, the Thunderbolt 2.0 card was not recognized by the Thunderbolt application and that the card did not function to its full capability.
It was determined that the card was installed in the PCIe 3.0 slot (SLOT 1). The Thunderbolt 2.0 card setup guide indicates that for proper operation the card must be installed into the PCIe 2.0 slot (SLOT 5) (Figure 1):
Figure 1: Installing the Thunderbolt 2.0 add-in card in Slot 5
원인
No cause information
해결
The Thunderbolt Add-In-Cards Setup Guide indicates that this card should be in PCIe slot 5 for both the Precision Tower 5810 and 7810. For the Precision Tower 3620, the Thunderbolt 2.0 card should be installed in slot 3 for it to function properly.
If you encounter this issue, ensure that the Thunderbolt 2.0 card is installed in the correct PCIe slot.
Once the Thunderbolt controller card was installed into the correct PCIe slot, the card was correctly identified by the Thunderbolt application and functioned normally.
해당 제품
Dell Precision Tower 3620, Precision Tower 5810문서 속성
문서 번호: 000129323
문서 유형: Solution
마지막 수정 시간: 06 6월 2024
버전: 5
다른 Dell 사용자에게 질문에 대한 답변 찾기
지원 서비스
디바이스에 지원 서비스가 적용되는지 확인하십시오.