NetWorker：升級至 19.10 後，Red Hat 8 伺服器上的電子郵件通知停止運作

• NetWorker 伺服器安裝在 Red Hat 8 上：

root@nwserver:~# cat /etc/redhat-release
Red Hat Enterprise Linux release 8.9 (Ootpa)

• NetWorker 19.10 安裝在 Red Hat 8.x 系統上。此情況可能發生在全新安裝，或從先前的 NetWorker 版本升級時。
• 設定 NetWorker 保護原則資源時使用的是 Linux mail 或 mailx 命令：

• 在升級 NetWorker 之前，可以順利收到電子郵件通知。
• 從 NetWorker 伺服器命令列傳送的電子郵件訊息也有收到：

root@nwserver:~# mailx -s "test email" backupadmin@domain.com < /dev/null
Null message body; hope that's ok

root@nwserver:~# tail -n 7 /var/log/maillog
Feb 14 16:13:49 nwserver sendmail[24024]: 41ELDnaE024024: from=root, size=229, class=0, nrcpts=1, msgid=<202402142113.41ELDnaE024024@nwserver.amer.lan>, relay=root@localhost
Feb 14 16:13:49 nwserver sendmail[24024]: STARTTLS=client, relay=[127.0.0.1], version=TLSv1.3, verify=FAIL, cipher=TLS_AES_256_GCM_SHA384, bits=256/256
Feb 14 16:13:49 nwserver sendmail[24025]: STARTTLS=server, relay=localhost [127.0.0.1], version=TLSv1.3, verify=NOT, cipher=TLS_AES_256_GCM_SHA384, bits=256/256
Feb 14 16:13:49 nwserver sendmail[24025]: 41ELDn4l024025: from=<root@nwserver.amer.lan>, size=490, class=0, nrcpts=1, msgid=<202402142113.41ELDnaE024024@nwserver.amer.lan>, proto=ESMTPS, daemon=MTA, relay=localhost [127.0.0.1]
Feb 14 16:13:49 nwserver sendmail[24024]: 41ELDnaE024024: to=backupadmin@domain.com, ctladdr=root (0/0), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=30229, relay=[127.0.0.1] [127.0.0.1], dsn=2.0.0, stat=Sent (41ELDn4l024025 Message accepted for delivery)
Feb 14 16:13:50 nwserver sendmail[24027]: STARTTLS=client, relay=mailhub.domain.com., version=TLSv1.2, verify=OK, cipher=ECDHE-RSA-AES256-GCM-SHA384, bits=256/256
Feb 14 16:13:50 nwserver sendmail[24027]: 41ELDn4l024025: to=<backupadmin@domain.com>, ctladdr=<root@nwserver.amer.lan> (0/0), delay=00:00:01, xdelay=00:00:01, mailer=esmtp, pri=120490, relay=mailhub.domain.com. [10.10.10.10], dsn=2.0.0, stat=Sent (ok:  Message 225328373 accepted)

• 在 /nsr/logs/policy/POLICY_NAME/ 下的工作流程記錄回報下列錯誤：

root@nwserver:~# nsr_render_log /nsr/logs/policy/Server\ Protection/workflow_Server\ backup_064001.raw
133550 02/14/2024 11:01:35 AM  1 0 0 3269973824 446260 0 nwserver.amer.lan nsrworkflow NSR notice Starting Protection Policy 'Server Protection' workflow 'Server backup'.
199800 02/14/2024 11:01:35 AM  1 5 0 3269973824 446260 0 nwserver.amer.lan nsrworkflow NSR notice Consider starting action 'Server db backup', enabled 1, schedule action '1'
204318 02/14/2024 11:01:35 AM  1 1 0 3269973824 446260 0 nwserver.amer.lan nsrworkflow SYSTEM notice Request to run the enabled action 'Server db backup' that has level configured as '1'.
201496 02/14/2024 11:01:35 AM  1 1 0 3269973824 446260 0 nwserver.amer.lan nsrworkflow SYSTEM notice Starting the scheduled action 'Server db backup'.
123316 02/14/2024 11:01:35 AM  1 0 0 3269973824 446260 0 nwserver.amer.lan nsrworkflow NSR notice Starting action 'Server Protection/Server backup/Server db backup' with command: 'nsrdbsave -l 1'.
123321 02/14/2024 11:01:35 AM  1 0 0 3269973824 446260 0 nwserver.amer.lan nsrworkflow NSR notice Action 'Server Protection/Server backup/Server db backup's log will be in '/nsr/logs/policy/Server Protection/Server backup/Server db backup_064002.raw'.
123325 02/14/2024 11:02:25 AM  1 0 0 3269973824 446260 0 nwserver.amer.lan nsrworkflow NSR notice Action 'Server Protection/Server backup/Server db backup' succeeded.
199800 02/14/2024 11:02:25 AM  1 5 0 3269973824 446260 0 nwserver.amer.lan nsrworkflow NSR notice Consider starting action 'Expiration', enabled 1, schedule action 'exec'
204318 02/14/2024 11:02:25 AM  1 1 0 3269973824 446260 0 nwserver.amer.lan nsrworkflow SYSTEM notice Request to run the enabled action 'Expiration' that has level configured as 'exec'.
201496 02/14/2024 11:02:25 AM  1 1 0 3269973824 446260 0 nwserver.amer.lan nsrworkflow SYSTEM notice Starting the scheduled action 'Expiration'.
5 02/14/2024 11:02:25 AM  1 1 0 0 unknown unknown LOG unrendered /bin/mailx: symbol lookup error: /bin/mailx: undefined symbol: SSLv3_client_method, version OPENSSL_1_1_0

NetWorker 19.10 的其中一個改善項目是關於 SSL。NetWorker 提供自己的 SSL 程式庫，並匯出於 networkerrc 檔案：

root@nwserver:~# cat /opt/nsr/admin/networkerrc | grep "NSR_LIBS\|LD_LIBRARY_PATH"
        NSR_LIBS=/usr/lib/nsr
        NSR_LIBS=/usr/lib/nsr/lib64
        # It must be the first entry of LD_LIBRARY_PATH otherwise it fails to load libraries.
        NSR_LIBS=/usr/lib/nsr/lib64/cst:/usr/lib/nsr/lib64
LD_LIBRARY_PATH=${NSR_LIBS}:$LD_LIBRARY_PATH
export LD_LIBRARY_PATH

Red Hat 8.x 上的 mail 版本包含一個 SSL 程式庫，其中包括 SSv3：

root@nwserver:~# ldd /bin/mail | grep ssl
        libssl.so.1.1 => /lib64/libssl.so.1.1 (0x00007f116357b000)

root@lnx-client02:~# nm -D /lib64/libssl.so.1.1 | egrep -i "SSLv3_"
0000000000022780 T SSLv3_client_method
0000000000022760 T SSLv3_method
0000000000022770 T SSLv3_server_method
root@nwserver:~# 

NetWorker 19.10 已從其程式庫中移除 SSLv3，因為這是潛在的安全性漏洞，且可能遭利用：

root@nwserver:~# nm -D /usr/lib/nsr/lib64/libssl.so.1.1 | egrep -i "SSLv"
root@nwserver:~# 

Mail 套件使用的是舊的 libssl 程式庫。問題出在 mail 套件，因此是在 NetWorker 之外。

選項 1：

交換或郵件管理員可以檢閱郵件伺服器組態，並查看是否有停用 SSLv3 改採 TLS 1.2 的選項。

選項 2：

必須在 Linux mail/mailx 套件中發佈此問題的修正。Mail 必須更新，以包含 libssl ，而其不使用 SSLv3。在撰寫本 KB 時，為 Red Hat 8.x 列出的唯一一個 mail 套件是在 2019 年發佈的 mailx-12.5-29.el8.x86_64。此問題會影響此 mail 套件。

確認安裝的 mail 套件：

rpm -qa | grep mail

root@nwserver:~# rpm -qa | grep mail
sendmail-8.15.2-34.el8.x86_64
mailcap-2.1.48-3.el8.noarch
mailx-12.5-29.el8.x86_64
procmail-3.22-47.el8.x86_64

執行下列作業，即可取得 mail 套件詳細資料： 

yum provides mail

root@nwserver:~# yum provides mail
Updating Subscription Management repositories.
Last metadata expiration check: 1:55:22 ago on Wed 21 Feb 2024 09:35:43 AM EST.
mailx-12.5-29.el8.x86_64 : Enhanced implementation of the mailx command
Repo        : @System
Matched from:
Filename    : /bin/mail

mailx-12.5-29.el8.x86_64 : Enhanced implementation of the mailx command
Repo        : rhel-8-for-x86_64-baseos-rpms
Matched from:
Filename    : /bin/mail

yum upgrade mailx

因應措施：

linux86w)
        # cst path is required to locate dynamic libraries of cst (also loads internal bsafe crypto libraries).
        # It must be the first entry of LD_LIBRARY_PATH otherwise it fails to load libraries.
        # cst comes with own bsafe library. cst bsafe library version may or may not be the same
        # version of bsafe library used by other components in the product.
        NSR_LIBS=/usr/lib/nsr/lib64/cst:/usr/lib/nsr/lib64
        OS_LIBS=/lib64    
        ERLCOOKIE_HOME=/nsr/rabbitmq
:::::::
esac

LD_LIBRARY_PATH=${OS_LIBS}:${NSR_LIBS}:$LD_LIBRARY_PATH

2. Restart NetWorker:

systemctl restart networker

root@lnx-nwserv:~# ldd /usr/bin/mail
        linux-vdso.so.1 (0x00007fffb211a000)
        libssl.so.3 => /lib64/libssl.so.3 (0x00007fad91b73000)
        libcrypto.so.3 => /lib64/libcrypto.so.3 (0x00007fad91600000)
        libgssapi_krb5.so.2 => /lib64/libgssapi_krb5.so.2 (0x00007fad91b1c000)
        libidn2.so.0 => /lib64/libidn2.so.0 (0x00007fad91afb000)
        libtinfo.so.6 => /lib64/libtinfo.so.6 (0x00007fad91acb000)
        libc.so.6 => /lib64/libc.so.6 (0x00007fad91200000)
        libz.so.1 => /lib64/libz.so.1 (0x00007fad91aaf000)
        libkrb5.so.3 => /lib64/libkrb5.so.3 (0x00007fad91525000)
        libk5crypto.so.3 => /lib64/libk5crypto.so.3 (0x00007fad91a96000)
        libcom_err.so.2 => /lib64/libcom_err.so.2 (0x00007fad91a8f000)
        libkrb5support.so.0 => /lib64/libkrb5support.so.0 (0x00007fad91a7e000)
        libkeyutils.so.1 => /lib64/libkeyutils.so.1 (0x00007fad91a77000)
        libresolv.so.2 => /lib64/libresolv.so.2 (0x00007fad91a61000)
        libunistring.so.2 => /lib64/libunistring.so.2 (0x00007fad9107b000)
        /lib64/ld-linux-x86-64.so.2 (0x00007fad91d2e000)
        libselinux.so.1 => /lib64/libselinux.so.1 (0x00007fad91a34000)
        libpcre2-8.so.0 => /lib64/libpcre2-8.so.0 (0x00007fad91489000)

root@lnx-nwserv:~# nm -D /lib64/libssl.so.3 | egrep -i "SSLv3_" 
root@lnx-nwserv:~#