How to identify the iDRAC version embedded in a PowerEdge server and hardware leveraging PowerEdge server hardware
概要: Most PowerEdge servers have an embedded Integrated Dell Remote Access Controller (iDRAC). Some storage, hyper-converged, solution hardware products leverage the PowerEdge servers hardware also have an embedded iDRAC. This article helps to quickly identify the iDRAC version. ...
この記事は次に適用されます：
この記事は次には適用されません：
この記事は、特定の製品に関連付けられていません。
すべての製品パージョンがこの記事に記載されているわけではありません。
現象
Most PowerEdge servers and other products leverage a PowerEdge server hardware have an embedded Integrated Dell Remote Access Controller.
Identify the iDRAC version based on PowerEdge model
The Dell PowerEdge servers by generation lists PowerEdge server models including the embedded iDRAC. This will not provide the license level.Identify iDRAC version using the iDRAC Web Interface
Log in to the iDRAC interface. The default iDRAC IP address 192.168.0.120. Upon login, the version is displayed at the upper left of the iDRAC along with the iDRAC license level.
Figure 1: iDRAC9
Figure 2: iDRAC8
In addition to the version of iDRAC embedded in the PowerEdge server model, iDRAC features are available based on the license level. Additional information on licensing is available in the Support for Integrated Dell Remote Access Controller 7 (iDRAC7) , Support for Integrated Dell Remote Access Controller 8 (iDRAC8) , and Support for Integrated Dell Remote Access Controller 9 (iDRAC9) ; Licensing section.
原因
Dell
解決方法
Dell Technologies
製品
DRAC4, DRAC5, iDRAC6, iDRAC7, iDRAC8, iDRAC9文書のプロパティ
文書番号: 000177885
文書の種類: Solution
最終更新: 14 3月 2023
バージョン: 7
質問に対する他のDellユーザーからの回答を見つける
サポート サービス
お使いのデバイスがサポート サービスの対象かどうかを確認してください。