PowerEdge: How to Create a Bootable USB Device with Rufus for Updates
概要: Learn how to create a bootable USB with Rufus to update Dell PowerEdge servers. Follow the step-by-step instructions to prepare and create a bootable USB media.
この記事は次に適用されます：
この記事は次には適用されません：
この記事は、特定の製品に関連付けられていません。
すべての製品パージョンがこの記事に記載されているわけではありません。
手順
This article provides information about making a USB device bootable and integrating an update-image (ISO-file). For servers without an optical drive (DVD) or a configured integrated Dell Remote Access Controller (iDRAC) this is an alternative way of updating all server firmware in one single step.
To create a bootable USB device, you can use the freeware tool Rufus
Note: Rufus is not a Dell certified software. Installation and use it at your own risk. We share our best practices with Rufus but do not support issues regarding this program.
- Download the tool
- Create a Smart Bootable ISO using the Dell Repository Manager (DRM).
- Start the tool
- Insert a USB device (Rufus auto-selects the USB device)
- Choose the created or downloaded ISO-file (Rufus selects the appropriate settings)
- Partition Screen = MBR
- File System = FAT32
- Cluster Size = 1024
- Click Start to create the media
- Restart the server and boot from the created device
If the bootable ISO fails to run after being applied to a bootable USB, change the server boot mode to BIOS or UEFI and attempt the procedure again. If the bootable ISO continues to fail, it is recommended to download the ISO file again or try applying the image to a different USB drive.
Rufus Screenshot
Figure 1: Rufus examples
The first figure shows when the freeware is launched. The second figure shows the Bootable ISO file selected. Click "Start" to launch the process.
対象製品
PowerEdge文書のプロパティ
文書番号: 000141551
文書の種類: How To
最終更新: 26 2月 2025
バージョン: 9
質問に対する他のDellユーザーからの回答を見つける
サポート サービス
お使いのデバイスがサポート サービスの対象かどうかを確認してください。