PowerEdge: How to remove or replace a Power Supply Unit (PSU)
概要: Step-by-step instructions to remove and replace the Power Supply Unit (PSU).
この記事は次に適用されます：
この記事は次には適用されません：
この記事は、特定の製品に関連付けられていません。
すべての製品パージョンがこの記事に記載されているわけではありません。
手順
Replacing a power supply unit is a simple action. If the server has two power supplies configured in redundant mode, which is the default setting, you can remove one without shutting down the server.
The remaining power supply continues to provide the power to the server. In general, all components with an amber removal tool can be unplugged while the server is powered on.
Warning: The system requires at least one power supply for normal operation. On power-redundant systems, remove and replace only one power supply at a time in a system that is powered on.
- Disconnect the power cable from the power source and from the power supply unit that you intend to remove, and then remove the cable from the strap.
- Press the release latch and slide the power supply unit out of the chassis.
| 1. | Release latch |
| 2. | Power supply unit cable connector |
| 3. | Power supply unit |
| 4. | Connector |
| 5. | Power supply unit handle |
To insert the new power supply, insert the block in the slot. This operation can be done while the server is powered on.
その他の情報
Removing a PowerEdge Power Supply Unit
Duration: 00:00:45
When available, closed caption (subtitles) language settings can be chosen using the CC icon on this video player.
対象製品
Rack Servers, PowerEdge T360, PowerEdge T440, PowerEdge T550, PowerEdge T560, PowerEdge T640文書のプロパティ
文書番号: 000141313
文書の種類: How To
最終更新: 23 9月 2024
バージョン: 12
質問に対する他のDellユーザーからの回答を見つける
サポート サービス
お使いのデバイスがサポート サービスの対象かどうかを確認してください。