Article Summary
This article provides some typical commands that can be used with OpenManage Server Administrator (OMSA).
Commands in this article are executed from a tool that allows CLI operation such as a command prompt, on the system where the OMSA is installed.
Table of Contents
1. Status Check
2. Gather and Clear a Log
3. Storage Related
4. Other
Object | Command |
---|---|
Check the memory status | omreport chassis memory |
Check each version | omreport system summary |
Check slots | omreport chassis slots |
Check each information including Tag | omreport chassis info |
Check the BIOS settings | omreport chassis biossetup |
Check the OMSA version | omreport about |
Check the Power Supply Unit status | omreport chassis pwrsupplies |
Check the power consumption | omreport chassis pwrmonitoring |
Object | Command |
---|---|
Clear hardware logs | omconfig system esmlog action=clear |
Clear alert logs | omconfig system alertlog action=clear |
View hardware logs | omreport system esmlog |
View alert logs | omreport system alertlog |
Collect a controller log | omconfig storage controller action=exportlog controller=controller ID |
Object | Command |
---|---|
Rebuild virtual disk | omconfig storage pdisk action=rebuild controller=controller ID pdisk=physical disk ID |
Check a virtual disk | omreport storage vdisk controller=controller ID |
Check a disk that is assigned to a virtual disk | omreport storage pdisk controller=controller ID vdisk=virtual disk ID |
Force a physical disk offline | omconfig storage pdisk action=offline controller=controller ID pdisk=physical disk ID |
Object | Command |
---|---|
Change the BIOS C-State settings | omconfig chassis biossetup attribute=cstates setting=disabled |