How to export the PERC Controller Debug Log via the BIOS RAID Controller

This article explains how to export the RAID controller log (TTY log) directly from RAID Controller (PERC).
In addition to this,you can also export the RAID controller log (TTY log ) from OMSA (OpenManage Server Administrator) using the interface or using the command lines .

Note: The PERC controller debug log is also known as a TTY log among Technical Support.

Please prepare a USB flash disk to save the log.
The following steps works for PERC8/PERC9/PERC10. This example uses a PERC10-H740.

1. Click F2 to enter the system BIOS.
   
2. Choose Device Settings
   
3. Choose Integrated RAID Controller
   
4. Choose Main Menu
   
5. Choose Controller Management
   
6. Go to the bottom of the page and choose Advanced Controller Management
   
7. Choose Save Debug Log
   
8. Select the location and enter the file name then choose Save Log
   
9. Click ok