How to Reseat the Keycap when a Key Falls Off the Laptop Keyboard
概要: The following article explains how to reseat the keycap when a key falls off the keyboard on a Laptop.
この記事は次に適用されます：
この記事は次には適用されません：
この記事は、特定の製品に関連付けられていません。
すべての製品パージョンがこの記事に記載されているわけではありません。
手順
Reseating the keycap
It is possible for the keycap on the internal keyboard to get stuck or come off while using a laptop. To put the keycap back on the keyboard, run through the following steps.
You can reseat a loose keycap:
- Align it with the scissored spring underneath.
- Press down with your finger until the keycap snaps back into place. See Figure 1.
NOTE: You might be required to wiggle your finger back and forth for the keycap to snap down on the scissor spring. There are two snaps, one at the top and one at the bottom of the key.
- Where there is a scissor support bar that is loose, clip the lower part of the bar on first under the bottom scissor rail.
- Snap the upper part over the top scissor rail.
- Line up the keycap to reattach it. See Figure 2.
You can learn more about the Dell Service Descriptions at this page:
NOTE: Did the above instructions fail to resolve your issue? Are your keyboard keys popped, broken, damaged, or lost? Use the following link to contact Dell Support:
対象製品
Alienware, Inspiron, Latitude, Vostro, XPS, Legacy Laptop Models文書のプロパティ
文書番号: 000133100
文書の種類: How To
最終更新: 21 8月 2024
バージョン: 5
質問に対する他のDellユーザーからの回答を見つける
サポート サービス
お使いのデバイスがサポート サービスの対象かどうかを確認してください。