Setting Up the P2415Q and P2715Q Monitors with HDMI 2.0 that Support 4K x 2K 60Hz

Dell P2415Q and P2715Q monitors purchased before March 2016 (Versions A00, A01, A02), only support HDMI 1.4 and provide 4K x 2K (3840 x 2160 pixels) resolution @ 30 Hz using the HDMI cable connection. 4K x 2K @60 Hz is available by DisplayPort connection on these displays.

No cause information

You can enable HDMI 2.0 in your P2415Q, or P2715Q flat panel displays purchased after February 2016 (Version A03) using the following steps:

1. Unplug all video cables from the display. (Leave only the power connected to the display.)
2. Power on the display.
3. Select the HDMI (MHL) input option. (A floating dialogue box appears.)
4. Press and hold the button that is associated with the Green check mark for 6 to 8 seconds (Figure 1).
   
   Figure 1
    
5. A dialogue box appears that states HDMI 1.4 Enable or Disable (Figure 2).
   
   Figure 2
    
6. Select the option to Disable HDMI 1.4 support and press the button next to the green check mark to confirm the selection.
7. Reconnect the video cables to the display.

Additional Information

Dell P2715Q/P2415Q User's Guide (in English)