文書番号: 000122325
Article Summary
This article provides how to identify the Switch Service Tag on Open Network Install Environment (ONIE).
Products to be applied:
Connect to the switch with a serial console via the serial console port.
Turn OFF then turn ON the switch power to restart.
After the restart completed, press ESC key within 5 seconds once the message "Press ESC to stop autoboot..." displayed on the terminal software.
Select ONIE from the Grub menu and press Enter key.
Select Rescue from the ONIE menu and press Enter key.
Run the command: onie-syseeprom
on the ONIE prompt.
The Service Tag is displayed in the "Service Tag" line.
Networking, PowerSwitch S3048-ON, PowerSwitch S4048-ON, PowerSwitch S6000 ON, PowerSwitch S4048T-ON, PowerSwitch S6010-ON, PowerSwitch S6100-ON, PowerSwitch Z9100-ON
20 9月 2021
4
How To