Open Networking switch - How to identify the Service Tag on Open Network Install Environment (ONIE)

Products to be applied:

• Dell Networking S3048-ON
• Dell Networking S4048-ON
• Dell Networking S4048T-ON
• Dell Networking S6000-ON
• Dell Networking S6010-ON
• Dell Networking S6100-ON
• Dell Networking Z9100-ON

How to Identify Service tag

1. Connect to the switch with a serial console via the serial console port.

2. Turn OFF then turn ON the switch power to restart.

3. After the restart completed, press ESC key within 5 seconds once the message "Press ESC to stop autoboot..." displayed on the terminal software.
   

• Select ONIE from the Grub menu and press Enter key.
  

• Select Rescue from the ONIE menu and press Enter key.

   

  If the NOS is installed, ensure the Rescue is selected since OS does not boot if ""Install OS" is selected.

   

  

• Run the command: onie-syseeprom on the ONIE prompt.
  The Service Tag is displayed in the "Service Tag" line.