文書番号: 000019776
VNX1/VNX2: How to find serial number on a VNX array (User Correctable)
概要: VNX1/VNX2: How to find serial number on a VNX array
文書の内容
手順
How to find serial number on a VNX1 or VNX2 array.
There are 2 ways to obtain the serial number on the VNX array.
There are 2 ways to obtain the serial number on the VNX array.
- Unisphere
- Login to Unisphere GUI
- Select the array
- Serial number can be found under "System Information" on "Dashboard"
- CLI:
- For Unified array, login to control station and run the following command: /nas/sbin/serial
Example:
[nasadmin@CS0 ~]$ /nas/sbin/serial
APM00111001117
- For block-only array, run the following command from workstation command prompt. The command below requires "Navisphere CLI" software installed onto the workstation:
Command: naviseccli -h <SPA_or_SPB_IP> -user <system_user> -password <system_password> -scope 0 getagent
Example:
Example:
C:\ naviseccli -h 123.123.123.123 -user ka_ds -password 1234 -scope 0 getagent
Agent Rev: 7.33.9 (2.31)
Name: K10
Desc:
Node: A-APM00111001117
Physical Node: K10
Signature: 3555924
Peer Signature: 3555337
Revision: 05.33.009.5.231
SCSI Id: 0
Model: VNX5400
Model Type: Rackmount
Prom Rev: 33.51.00
SP Memory: 16384
Serial No: APM00111001117
SP Identifier: A
Cabinet: DPE9
Agent Rev: 7.33.9 (2.31)
Name: K10
Desc:
Node: A-APM00111001117
Physical Node: K10
Signature: 3555924
Peer Signature: 3555337
Revision: 05.33.009.5.231
SCSI Id: 0
Model: VNX5400
Model Type: Rackmount
Prom Rev: 33.51.00
SP Memory: 16384
Serial No: APM00111001117
SP Identifier: A
Cabinet: DPE9
文書のプロパティ
影響を受ける製品
VNX2 Series
製品
VNX1 Series, VNX2 Series
最後に公開された日付
20 11月 2020
バージョン
2
文書の種類
How To