IDPA: How to create and download a log bundle
概要: This article describes how to collect a log bundle from the ACM (Appliance Configuration Manager) of an Integrated Data Protection Appliance. This procedure is applies to any appliance with a code level greater than 2.2. ...
手順
Create a Log Bundle
1. Open the UI of the ACM in a browser by accessing the following URL (Substituting the bracketed value with the actual name or IP of the ACM)https://<acm_ip_or_fqdn>:8543
2. Navigate to the upper right corner of the dashboard and select "Create log bundle" from the context menu under the log generation icon
3. Select either a single component from which to collect logs, or choose "Select All" to collect logs from all components
4. Select "OK" to generate the log bundle (A message will be displayed when this process completes)
Note: When choosing "Select All" from the component selection list, log bundle creation may take a significant amount of time.
Download a Log Bundle
1. Open the UI of the ACM in a browser by accessing the following URL (Substituting the bracketed value with the actual name or IP of the ACM)https://<acm_ip_or_fqdn>:8543
2. Navigate to the upper right corner of the dashboard and select "Download log bundle" from the context menu under the log generation icon
その他の情報
If a TSR (Hardware) log bundle has been requested, please refer to article 000021925 (Data Domain: How to gather TSR logs on PowerProtect DD3300 | DD6900 | DD9400 | DD9900 | x400 | DP4400).
Data Domain: How to gather TSR logs on PowerProtect DD3300 | DD6900 | DD9400 | DD9900 | x400 | DP4400
https://www.dell.com/support/kbdoc/en-us/000021925/data-domain-dd3300-how-to-generate-tsr-log-bundle-utilizing-idrac9?lang=en
Please refer this video:
Data Domain: How to gather TSR logs on PowerProtect DD3300 | DD6900 | DD9400 | DD9900 | x400 | DP4400
https://www.dell.com/support/kbdoc/en-us/000021925/data-domain-dd3300-how-to-generate-tsr-log-bundle-utilizing-idrac9?lang=en
Please refer this video: