No Boot Device Found When You Change the Boot Sequence to Legacy Mode
This article addresses a "No boot device found" issue affecting certain XPS, Latitude, Precision, and OptiPlex when changing the Boot Sequence to Legacy mode in the BIOS setup menu.
Riepilogo:This article addresses a "No boot device found" issue affecting certain XPS, Latitude, Precision, and OptiPlex when changing the Boot Sequence to Legacy mode in the BIOS setup menu.
Seleziona un prodotto per verificare la pertinenza dell'articolo
Questo articolo si applica a Questo articolo non si applica a
XPS 12-9250, 12-7275, Latitude 3490, 3590, 7280, 7480, 5280, 5480, 5580, Precision 3520, OptiPlex 7760, 7460, 7060, 5260, 5060, 3060, 5060 AIO (and later systems) report "No boot device found" when you change the Boot Sequence to Legacy mode in BIOS setup menu.
These specific systems are based on the 7th generation Kaby lake processor (and above) and are designed to boot exclusively in the Unified Extensible Firmware Interface (UEFI) boot environment. As a result, if legacy boot mode is selected, the system will not boot.
Causa
Note: This situation applies to any system from the Kaby lake 7th generation processor forward and is not limited to the systems that this article was originally based on.
Note: Later systems may not include an option for Legacy Mode. Continue to troubleshoot the No Boot Device as this article only applies to systems that provide the Legacy Mode option.
Risoluzione
Return the BIOS to UEFI Boot
You can resolve this issue by returning the system to the UEFI boot mode.
From a power off state, power the system on and press F2 to boot into the BIOS setup menu.
Select "Boot sequence"
Change the option from "Legacy" to "UEFI", then select "Apply" in the right lower corner.
Select "Advance Boot options" and disable "Enable Legacy Operation ROMs", then select "Apply" in the right lower corner.
Select "Secure Boot", then "Secure Boot Enable".
Change the option from "Disabled to Enabled", then select "Apply" in the right lower corner.
Select "Exit" in the right lower corner and wait for the system to reboot.
Dell provides an instructional video, "How to Fix a Boot Up Problem (Official Dell Tech Support)", that provides troubleshooting steps and is available on the Dell YouTube channel here: https://www.youtube.com/watch?v=uJcqHY7YbmA
Recommended Articles
Here are some recommended articles related to this topic that might be of interest to you.
Out of warranty? No problem. Browse to the Dell.com/support website and enter your Dell Service Tag and view our offers.
NOTE: Offers are only available for US, Canada, UK,France, Germany, and China personal computer customers. Server and Storage not applicable.
Prodotti interessati
Latitude 5280/5288, Latitude 7280, Latitude 3490, Latitude 5480/5488, Latitude 7480, Latitude 3590, Latitude 5580, Latitude 7275, OptiPlex 3060 Tower, OptiPlex 3060 Micro, OptiPlex 3060 Small Form Factor, OptiPlex 5060 Tower, OptiPlex 5060 Micro
, OptiPlex 5060 Small Form Factor, OptiPlex 5260 All-In-One, OptiPlex 7060 Tower, OptiPlex 7060 Micro, OptiPlex 7060 Small Form Factor, OptiPlex 7460 All-In-One, OptiPlex 7760 All-In-One, Precision 3520, XPS 12 9250
...
Proprietà dell'articolo
Numero articolo: 000151899
Tipo di articolo: Solution
Ultima modifica: 21 nov 2023
Versione: 7
Trova risposta alle tue domande dagli altri utenti Dell
Support Services
Verifica che il dispositivo sia coperto dai Servizi di supporto.
Proprietà dell'articolo
Numero articolo: 000151899
Tipo di articolo: Solution
Ultima modifica: 21 nov 2023
Versione: 7
Trova risposta alle tue domande dagli altri utenti Dell
Support Services
Verifica che il dispositivo sia coperto dai Servizi di supporto.