Passa al contenuto principale
Esci

Benvenuto in Dell

Il mio account
  • Effettua gli ordini in modo rapido e semplice
  • Visualizza gli ordini e monitora lo stato della spedizione
  • Crea e accedi a un elenco dei tuoi prodotti
Accedi Crea un account Accesso a Premier Accesso al Partner Program
Contattaci

I tuoi carrelli Dell.com

Kaby Lake Systems with USB Type-C DP Only (non-Thunderbolt) Connections Using WD15 or DS1000 May Have Blanking External Video

Riepilogo: This article explains what to do if your Latitude system shows blank or flickering video on external monitors connected using a USB-C DisplayPort (DP) Adapter.

Questo articolo si applica a Questo articolo non si applica a Questo articolo non è legato a un prodotto specifico. Non tutte le versioni del prodotto sono identificate in questo articolo.
Scopri le altre risorse

Sintomi

If you are using a Kaby Lake-based system with USB Type-C DisplayPort (non-Thunderbolt) connections and a WD15 or DS1000 dock, it may happen that your external monitors are blanking or flashing. This may only occur when a hardwired network connection is attached to the dock.

Causa

Current List of systems this might occur on

  • Latitude 7x80 (non-Thunderbolt configuration)
  • Latitude 5x80 (non-Thunderbolt configuration)
  • Latitude 5289 and 7389
Note: This does not affect the internal LCD screen and does not occur on systems with a Thunderbolt (Alpine Ridge) controller. This also does not occur on Skylake based systems.

Risoluzione

Verify that the Firmware Update version 1.0.0.8 is installed. This firmware is not the solution to the problem but must be updated for Kaby Lake systems. It is available on the Drivers and Download Website of the applicable systems and the WD15 download section.

There are two options available as a solution for this problem. You can either download the latest Realtek USB GBE Ethernet Controller Firmware Utility from the Drivers and Download Website or follow the manual steps below. These two options disable Selective Suspend for the Ethernet Adapter.

Manual steps (Figure 1):

  1. Open the Device Manager (right-click the Windows Button and click Device Manager)

  2. Expand the category Network Adapters

  3. Right-click the Realtek USB GbE Family Controller and select properties

  4. Click the Advanced tab

  5. Select "Selective suspend" in the menu and set the Value to "DISABLED."

  6. Press OK and reboot the system.

SLN306731_en_US__2selective-suspend-usb-ethernet-EN
Figure 1: Steps to disable Selective Suspend.

Prodotti interessati

Dell Dock WD15, Dell Dock with Monitor Stand DS1000, Latitude 5289 2-in-1, Latitude 7280, Latitude 5480/5488, Latitude 7480, Latitude 5580
Proprietà dell'articolo
Numero articolo: 000142885
Tipo di articolo: Solution
Ultima modifica: 23 lug 2024
Versione:  5
Trova risposta alle tue domande dagli altri utenti Dell
Support Services
Verifica che il dispositivo sia coperto dai Servizi di supporto.