How to identify the iDRAC version embedded in a PowerEdge server and hardware leveraging PowerEdge server hardware
Résumé: Most PowerEdge servers have an embedded Integrated Dell Remote Access Controller (iDRAC). Some storage, hyper-converged, solution hardware products leverage the PowerEdge servers hardware also have an embedded iDRAC. This article helps to quickly identify the iDRAC version. ...
Cet article concerne
Cet article ne concerne pas
Cet article n’est associé à aucun produit spécifique.
Toutes les versions du produit ne sont pas identifiées dans cet article.
Symptômes
Most PowerEdge servers and other products leverage a PowerEdge server hardware have an embedded Integrated Dell Remote Access Controller.
Identify the iDRAC version based on PowerEdge model
The Dell PowerEdge servers by generation lists PowerEdge server models including the embedded iDRAC. This will not provide the license level.Identify iDRAC version using the iDRAC Web Interface
Log in to the iDRAC interface. The default iDRAC IP address 192.168.0.120. Upon login, the version is displayed at the upper left of the iDRAC along with the iDRAC license level.
Figure 1: iDRAC9
Figure 2: iDRAC8
In addition to the version of iDRAC embedded in the PowerEdge server model, iDRAC features are available based on the license level. Additional information on licensing is available in the Support for Integrated Dell Remote Access Controller 7 (iDRAC7) , Support for Integrated Dell Remote Access Controller 8 (iDRAC8) , and Support for Integrated Dell Remote Access Controller 9 (iDRAC9) ; Licensing section.
Cause
Dell
Résolution
Dell Technologies
Produits
DRAC4, DRAC5, iDRAC6, iDRAC7, iDRAC8, iDRAC9Propriétés de l’article
Numéro d’article: 000177885
Type d’article: Solution
Dernière modification: 14 mars 2023
Version: 7
Trouvez des réponses à vos questions auprès d’autres utilisateurs Dell
Services de support
Vérifiez si votre appareil est couvert par les services de support.