Passer au contenu principal
  • Passer des commandes rapidement et facilement
  • Afficher les commandes et suivre l’état de votre expédition
  • Créez et accédez à une liste de vos produits

How to Run the Dell D1918H, D2421H, D2421DS, and D2721H Monitor Self-Test

Résumé: The following article provides information about running the self-test on Dell D1918H, D2421H, D2421DS, and D2721H monitors.

Cet article concerne Cet article ne concerne pas Cet article n’est associé à aucun produit spécifique. Toutes les versions du produit ne sont pas identifiées dans cet article.

Instructions

Monitor Self-Test

The self-test (integrated diagnostic tool) helps you determine if any screen abnormality you experience is an inherent problem with: (For example: Your monitor, video cable, video card, driver, or computer.)


Steps for running the self-test:

  1. Disconnect all video cables from the monitor and turn off your monitor.

  2. Turn on the monitor.

  3. When the Dell logo disappears and the screen shows "No signal," press buttons 2 + 3 + 5 (Figure 1) on the monitor simultaneously.
    D-Series Monitor Buttons

    The monitor enters the self-test screen.

  4. Carefully inspect the screen for abnormalities as the display turns to red, green, blue, black, and white automatically.

  5. Press button 5 to exit the self-test screen.


If you do not detect any screen abnormalities while using the self-test tool, the monitor is functioning properly. Check your video cable, video card, drivers, and computer.


Back to Top

 

Informations supplémentaires

Recommended Articles

Here are some recommended articles related to this topic that might be of interest to you.

Produits concernés

Dell D1918H, Dell D2421H, Dell D2721H
Propriétés de l’article
Numéro d’article: 000188980
Type d’article: How To
Dernière modification: 20 sept. 2024
Version:  9
Trouvez des réponses à vos questions auprès d’autres utilisateurs Dell
Services de support
Vérifiez si votre appareil est couvert par les services de support.