Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products

Kaby Lake Systems with USB Type-C DP Only (non-Thunderbolt) Connections Using WD15 or DS1000 May Have Blanking External Video

Résumé: This article explains what to do if your Latitude system shows blank or flickering video on external monitors connected using a USB-C DisplayPort (DP) Adapter.

Cet article concerne Cet article ne concerne pas Cet article n’est associé à aucun produit spécifique. Toutes les versions du produit ne sont pas identifiées dans cet article.

Symptômes

If you are using a Kaby Lake-based system with USB Type-C DisplayPort (non-Thunderbolt) connections and a WD15 or DS1000 dock, it may happen that your external monitors are blanking or flashing. This may only occur when a hardwired network connection is attached to the dock.

Cause

Current List of systems this might occur on

  • Latitude 7x80 (non-Thunderbolt configuration)
  • Latitude 5x80 (non-Thunderbolt configuration)
  • Latitude 5289 and 7389
Note: This does not affect the internal LCD screen and does not occur on systems with a Thunderbolt (Alpine Ridge) controller. This also does not occur on Skylake based systems.

Résolution

Verify that the Firmware Update version 1.0.0.8 is installed. This firmware is not the solution to the problem but must be updated for Kaby Lake systems. It is available on the Drivers and Download Website of the applicable systems and the WD15 download section.

There are two options available as a solution for this problem. You can either download the latest Realtek USB GBE Ethernet Controller Firmware Utility from the Drivers and Download Website or follow the manual steps below. These two options disable Selective Suspend for the Ethernet Adapter.

Manual steps (Figure 1):

  1. Open the Device Manager (right-click the Windows Button and click Device Manager)

  2. Expand the category Network Adapters

  3. Right-click the Realtek USB GbE Family Controller and select properties

  4. Click the Advanced tab

  5. Select "Selective suspend" in the menu and set the Value to "DISABLED."

  6. Press OK and reboot the system.

SLN306731_en_US__2selective-suspend-usb-ethernet-EN
Figure 1: Steps to disable Selective Suspend.

Produits concernés

Dell Dock WD15, Dell Dock with Monitor Stand DS1000, Latitude 5289 2-in-1, Latitude 7280, Latitude 5480/5488, Latitude 7480, Latitude 5580
Propriétés de l’article
Numéro d’article: 000142885
Type d’article: Solution
Dernière modification: 23 Jul 2024
Version:  5
Trouvez des réponses à vos questions auprès d’autres utilisateurs Dell
Services de support
Vérifiez si votre appareil est couvert par les services de support.