Numéro d’article: 000196714

ME5: How to locate the PowerVault enclosure service tag

Résumé: The enclosure service tag is a seven-digit alphanumeric number. It is found using the PowerVault Manager, command-line interface (CLI), or on an information tag at the front of the enclosure. This information is used to route support calls to appropriate personnel when contacting Dell EMC technical support. ...

Cet article a peut-être été traduit automatiquement. Si vous avez des commentaires concernant sa qualité, veuillez nous en informer en utilisant le formulaire au bas de cette page.

Contenu de l’article

Instructions

On the enclosure
The Service Tag and Express Service Code are found on the front of the system by pulling out the information tag. Alternatively, the information may be on a sticker on the back of the storage system chassis.

Using PowerVault Manager
The About panel (Maintenance > About) shows information about the system, its hardware, and its storage configuration.

The Service Tag is the seven-digit alphanumeric number that is written after the enclosure <number>:

Using the Command Line Interface (CLI)
The Service Tag is the seven-digit alphanumeric number that is shown in the output of either of the following commands:

show service-tag-info
show enclosures

Open an SSH session to either controllers' management IP address.

# show service-tag-info

Encl Service Tag
--------------------------------------
0    ABCD123
--------------------------------------
Success: Command completed successfully. (2022-01-21 04:16:23)

Propriétés de l’article

Produit concerné

PowerVault ME5012, PowerVault ME5024, PowerVault ME5084

Dernière date de publication

12 Aug 2022

Version

Type d’article

How To

Haut de la page

Bienvenue

Bienvenue dans l’univers Dell