Passer au contenu principal
  • Passer des commandes rapidement et facilement
  • Afficher les commandes et suivre l’état de votre expédition
  • Créez et accédez à une liste de vos produits
  • Gérer vos sites, vos produits et vos contacts au niveau des produits Dell EMC à l’aide de la rubrique Gestion des informations de l’entreprise.

Precision 5820 Tower, Precision 7820 Tower, Precision 7920 Tower NVMe Drives Do Not Work in Legacy Mode

Résumé: The NVMe Drives do not work in Legacy Mode on the Precision 5820 Tower, Precision 7820 Tower, and Precision 7920 Tower.

Cet article a peut-être été traduit automatiquement. Si vous avez des commentaires concernant sa qualité, veuillez nous en informer en utilisant le formulaire au bas de cette page.

Contenu de l’article


Symptômes

NVMe Drives disappear or do not work when in Legacy Mode.

Affected Platforms

  • Precision 5820 Tower
  • Precision 7820 Tower
  • Precision 7920 Tower

Cause

The Intel Volume Management Device (VMD) Technology (also known as Intel® Virtual RAID on CPU or vROC) does not support Legacy Mode. These drives will only show up attached to the controller when in UEFI Mode.

Résolution

Go into BIOS and disable the VMD controllers so that the platform uses the native NVMe controllers and NVMe Drivers on the operating system.

  1. Boot into BIOS setup
  2. Navigate to System Configuration an Intel VMD Technology and change the computer from Auto to Disabled and clear all the PCIE boxes on the same page (Figure 1).
    System Configuration

    Figure 1: System Configuration

  3. Click apply, OK, and then Exit.

Hot plug would no longer be supported on these drives when used in this mode.

Propriétés de l’article


Produit concerné

Precision 5820 Tower, Precision 7820 Tower, Precision 7920 Tower

Dernière date de publication

02 Oct 2023

Version

6

Type d’article

Solution